Husqvarna LE475 manual Storage Instructions, Maintenance Notes

Page 13
STORAGE INSTRUCTIONS

STORAGE INSTRUCTIONS

Edger-trimmers stored for any length of time should be completely drained of fuel to prevent gum deposits forming on essential parts such as the carburetor and fuel tank. Such deposits may a￿ect the operation of the engine when used again. Therefore, it is important that the following instructions be adhered to before starting engine. 1. Drain fuel tank completely. 2. Operate the engine until it stops from lack of fuel, to clean all gasoline out of carburetor. 3. While engine is still warm, drain the crank case. Re￿ll with fresh oil. 4. Remove spark plug, and pour one ounce of oil into the cylinder. Pull starter rope on the engine to spread the oil. Replace spark plug. 5. Clean dirt and cha￿ from cylinder and cylinder head ￿ns, blower housing, etc.

MAINTENANCE NOTES

13

Image 13
Contents Maintenance Information WITH PARTS LISTSpecications Operating InstructionsAVOID TABLE OF CONTENTSINJUR Y Thissymbolmarksimportantinstructionsrelatingtoyourpersonalsafety.ToMAINTENANCE AND STORAGE GENERAL SAFETY SUGGESTIONSTRAINING PREPARATIONEDGER-TRIMMER FEATURES INSTALLING THE THROTTLE WIRE ASSEMBLYFUEL SPECIFICATION ATTACHING THE HANDLEADJUSTING CUTTERHEAD ANGLE See Fig CLUTCH AND DEPTH LEVER SETTINGS See FigWARNING Never adjust cutterhead angle when engine is running OPERATING YOUR EDGER-TRIMMERWHEEL POSITIONING See Fig OPERATING YOUR EDGER-TRIMMER, CONTCURB RIDING POSITION WARNING Do not change wheel positions when engine is runningOPERATION OF THE EDGER TRIMMER CORRECT EDGER-TRIMMER USAGEThis equipment does not include a spark arrestor muer BLADE MAINTENANCE MAINTENANCE CHECKLISTMAINTAINING YOUR EDGER-TRIMMER SPARK PLUGLAWN EDGER AND TRIMMER PARTS ILLUSTRATION Engine Pulley LAWN EDGER AND TRIMMER PARTS LIST505289937 P R O B L E M TROUBLESHOOTING CHARTC A US E 1. Engine fails to startSTORAGE INSTRUCTIONS MAINTENANCE NOTESMAINTENANCE NOTES MAINTENANCE NOTES SECTION 1 LIMITED WARRANTY WARRANTY STATEMENTSECTION 2 HUSQVARNA’S OBLIGATIONS UNDER THE WARRANTY SECTION 6 PROCEDURE TO OBTAIN WARRANTY CONSIDERATION