Husqvarna 3120XP manual Key To Symbols, Key to symbols

Page 2

KEY TO SYMBOLS

KEY TO SYMBOLS

Key to symbols

WARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•Approved protective helmet

•Approved hearing protection

•Protective goggles or a visor

Both of the operator′s hands must be used to operate the chain saw. Please see page 30 in your "Chain saw operator′s safety manual".

Never operate a chain saw holding it with one hand only. Please see page 30 in your "Chain saw operator′s safety manual".

Contact of the guide bar tip with any object should be avoided. Please see pages 12-21 in your "Chain saw operator′s safety manual".

Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury. Please see pages 12- 21 in your "Chain saw operator′s safety manual".

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Refuelling.

Filling with oil and adjusting oil ﬂow.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

2 – English

Image 2

Contents English 3120XPOperator’s manual EPA KEY TO SYMBOLS Key to symbolsBefore using a new chain saw CONTENTSContents Personal protective equipment SAFETY INSTRUCTIONSMachine′s safety equipment Chain brake and front hand guard Chain catcher Stop switchThrottle lock Right hand guardChecking the front hand guard MufﬂerChecking brake band wear Checking the inertia brake releaseChain catcher Stop switchThrottle lock Right hand guardCutting equipment designed to minimise kickback Cutting equipmentGeneral rules MufﬂerChain Some terms that describe the bar and chainWARNING! The following faults will increase General information on sharpening cutting teethSharpening cutting teeth WARNING! The risk of kickback is increasedTensioning the chain General advice on setting raker clearanceSetting the raker clearance Filling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketHow to avoid kickback What is kickback?General safety precautions StartingGeneral working instructions Fuel safetyBasic safety rules Transport and storageTerms Basic cutting techniqueGeneral Limbing 12 3Cutting Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatFelling cut WARNING! Unless you have special trainingCutting the trunk into logs General adviceFreeing a tree that has fallen badly Freeing a ”trapped tree”WHAT IS WHAT? What is what on the chain saw?ASSEMBLY Fitting the bar and chainGasoline FUEL HANDLINGFuel Two-strokeoilFuelling Cold engine STARTING AND STOPPINGStarting and stopping Warm engineStopping 28 – EnglishBasic settings and running in MAINTENANCEFunction, Basic settings, Fine adjustment Fine adjustmentHigh speed jet H Correctly adjusted carburettorStarter Changing a broken or worn starter cordFitting the starter Air ﬁlterSpark plug Needle bearing lubrication Adjustment of the oil pumpMufﬂer Extra chain oilDaily maintenance Weekly maintenanceMonthly maintenance Cooling systemTECHNICAL DATA Technical dataPitch, inch ChainLength, inches Max nose radiusMANUFACTURER′S WARRANTY COVERAGE FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONS OWNER′S WARRANTY RESPONSIBILITIESPage ´z+H7=¶5y¨ ´z+H7=¶5y¨ Page 1140232-95 ´z+H7=¶5y¨ ´z+H7=¶5y¨

Related manuals

Manual 40 pages 33.24 Kb