H | • If the lubrication system does not seem to be working, and the following | |
steps do not help, take your saw to a service dealer. | ||
E N G L I S | ||
- Check the guide bar's oil passage and clean if necessary. | ||
| ||
| - Check guide bar groove and clean if necessary. | |
|
-Ensure that the nose sprocket turns easily and is not clogged. Clean and grease if necessary.
Checking chain wear
•Inspect chain every day for:
-Visible cracks in rivets or links.
-Stiffness.
-Abnormal wear in rivets or links.
-Min. 3 mm (1/8") horizontal cutter length.
-Any deviation on any of these points indicates a worn chain which must be discarded.
Checking drive sprocket
•Check drive sprocket wear regularly and replace when wear becomes excessive.
min 3 mm 
(1/8")
16