Husqvarna 96045002100, YTH21K46 Reverse Operation System ROS See Fig, To Operate on Hills

Page 11

OPERATION

CAUTION:Donotoperatethemowerwithout eithertheentiregrasscatcher,onmowersso equipped,orthedeflectorshield(S)inplace.

REVERSE OPERATION SYSTEM (ROS) (See Fig. 11)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

 

8

 

0282

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

FIG. 11

•Look down and behind before and while backing.

•Slowly depress reverse drive pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowlydepressappropriatedrivepedaltoslowestsetting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 12)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

FIG. 12

SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine has run and flashes to indicate that the engine or mower needs servicing. When service is required, the service reminder will flash for two hours. To service engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the ignition key is in any position but "STOP". For accurate reading, be sure key remains in the "STOP" position when engine is not running.

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents YTH21K46 II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor Stopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking Brake See FigTo USE Cruise Control J See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Operate on Hills Service REMINDER/HOUR MeterUsing the Reverse Operation System Reverse Operation System ROS See FigTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsSchedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig BatteryTractor Blade CareEngine Deck Washout Port See Fig CleaningSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig Install belt on engine pulley M, in belt keepers G To Level Mower Visual SIDE-TO-SIDE Adjustment See FigTo Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigReplacing Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine continues Tractor - Model Number YTH21K46 96045002100, Product no 45 SchematicElectrical KEY Part Description Chassis Tractor - Model Number YTH21K46 96045002100, Product no 45 Drive Washer Harden .793 x 1.637 x Engine 30!2+ª!22%34%2ª+4Engine Kohler Model No. SV610-0212 Steering Assembly Tractor - Model Number YTH21K46 96045002100, Product no 45 Mower Deck KEY Part NO. no Description 8787 100 101 Mower Lift532 42 Seat Seat AssemblyWheels and Tires DecalsOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation08.18.09 CL

96045002100, YTH21K46 specifications

The Husqvarna YTH21K46 is a robust and efficient riding mower, designed for homeowners who demand reliability, performance, and ease of use in maintaining their lawns. Powered by a strong 21.5 HP Kohler engine, this riding mower provides ample power to tackle various mowing conditions while ensuring durability and long-lasting performance.

One of the standout features of the YTH21K46 is its 46-inch cutting deck. This deck allows for efficient mowing of medium to large-sized lawns, covering more ground in fewer passes. The cutting height can be easily adjusted via a rugged lever, offering six different positions ranging from 1 to 4 inches. This versatility enables users to achieve the desired lawn appearance while accommodating different grass types and seasonal conditions.

An important technological feature included in this model is the ReadyStart system, which allows for easy engine start-up without the need to prime, enhancing user convenience. This, combined with the smooth hydrostatic transmission, provides seamless acceleration and deceleration, making it simple to navigate around obstacles and tight spaces. The steering wheel is ergonomically designed, ensuring comfort and ease of control during operation.

The Husqvarna YTH21K46 also boasts a comfortable and spacious operator's platform, which includes an adjustable seat to accommodate different user heights, promoting an enjoyable mowing experience. The optimized design creates an ideal driving position, reducing fatigue during extended use. Moreover, a front-mounted bumper adds protection and enhances the thermal efficiency of the mower.

In addition to its cutting capabilities, this riding mower is designed with functionality in mind. The integrated LED headlights improve visibility during early morning or late evening mowing sessions. A washout port makes it easy to clean the cutting deck, ensuring optimal performance and longevity.

Lastly, the YTH21K46 supports various attachments and accessories, including mulching kits, baggers, and snow blades, expanding its versatility for year-round lawn care. This adaptability means it's not just a seasonal mower; it serves as a multifunctional tool to help maintain your property in every season.

With its blend of powerful performance, user-friendly design, and smart technologies, the Husqvarna YTH21K46 provides homeowners a reliable solution for achieving a well-manicured lawn.
Top Page Image Contents