Husqvarna 323P4, 325P4, 325P5 manual Assembling and dismantling the two-part shaft 325P5

ASSEMBLY

Assembling and dismantling the two-part shaft (325P5)

Assembling:

• Make sure the handle is loose.

• Guide the cut-out on the lower section of the shaft into the coupling‘s locking plate on the upper section of the shaft. The sections are then locked together.

• Tighten the handle.

Dismantling

• Undo the handle (at least three turns).

•Press the handle towards the coupling.

• Carefully twist the lower section out of the lock.

•Hold both parts of the shaft and pull out the lower section from the coupling.

18 – English