Husqvarna 323P4, 325P4, 325P5 manual Symbol Explanation, Symbols

Page 2

SYMBOL EXPLANATION

Symbols

WARNING! This machine can be dangerous. Careless or incorrect use can result in serious or fatal injury to the operator or others.

Read through the Operator‘s Manual carefully and understand the content before using the machine.

Always use

A protective helmet where there is a risk of falling objects

Ear protection

Approved eye protection

This product is in accordance with applicable CE directives.

This machine is not electrically insulated. If the machine touches or comes close to high-voltage

power lines it could lead to death or serious injury. Electricity can jump from one point to another by arcing. The higher the voltage, the greater the distance electricity can jump. Electricity can also travel through branches and other objects, especially if they are wet. Always keep a safe distance of at least 10 m (30 ft) between the machine and high-voltage power lines and/or any objects that are touching them. If you need to work closer than this always contact the relevant power company to make sure the power is switched off before you start work.

This machine has a long reach. Make sure that no people or animals come closer than 15 m (45 ft) when the machine is running.

• Always wear approved protective gloves.

• Use anti-slip and stable boots.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Checks and/or maintenance should be carried out with the engine

switched off, with the stop switch in the STOP position.

• Always wear approved protective gloves.

• Regular cleaning required.

• Ocular control.

• Approved eye protection must always be used.

Chain oil and chain oil flow adjustment

2 – English

Image 2
Contents 323P4 325P4X-SERIES EnglishSymbol Explanation SymbolsContents Stop switch Safety InstructionsMachine‘s safety equipment Personal protective equipmentVibration damping system MufflerSafety Instructions Guide bar Specification of blade and chainCutting equipment Saw chain General information on sharpening cutting teethGeneral advice on setting raker clearance Sharpening cutting toothLubricating cutting equipment Adjusting raker clearanceTensioning the saw chain Chain oilChecking chain lubrication Adjusting chain lubricationChecking wear on cutting equipment Chain drive wheelStart General safety instructionsFuel safety Transport and storageProtective instructions regarding the surroundings Safety instructions when using the machinePersonal protection Protective instructions while workingProtective instructions when work is completed Basic working techniquesSafety Instructions What is WHAT? What is what on the machine?Fitting the cutting head AssemblyMounting guide bar and chain Adjusting the harness Filling with oilAssembling and dismantling the two-part shaft 325P5 AssemblingFuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Maintenance CarburetorHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Spark plug MufflerCooling system Weekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical data 323P4 325P4 325P5Bar and chain combinations Bar ChainEmission Control Warranty Statement Your Warranty Rights Obligations114 00 2002W22