Husqvarna 970, 850 manual Dismantling the cutting unit

Page 29

 

MAINTENANCE

E

Dismantling the cutting unit

 

The cutting unit can be released from the machine

 

for cleaning or checking of the blades and screws.

1

 

 

Dismantle the cutting unit on Rider 850 as follows:

 

1.

Dismantle the front hood and right-hand and left-

2

 

hand fenders as described on page 20.

 

2.

Raise the cutting unit by pulling the lift lever

 

 

backwards to the transport position.

 

3.

Dismantle the drive belt (1).

 

4.

Lower the cutting unit by pressing in the lift

 

 

lever’s lock button and moving the lever to

 

 

cutting position, and then setting the lowest

 

 

cutting height with the cutting height lever.

 

5.Remove the hair-needle spring (2) from the chain retainer.

6.Remove the lock pins (one on each side) on the rear edge of the unit.

!WARNING!

When the lock pins are removed the unit will drop to the ground. Make sure to keep your hands or fingers away from under the unit during dismantling.

Fitting of the cutting unit takes place in the reverse order to dismantling.

Dismantle the cutting unit on Rider 970 Bioclip as follows:

1.Dismantle the front hood as described on page 20.

2.Set the cutting height to the highest position. Push the stop (1) in against the crossbar and then set the cutting height to the lowest position. The cutting unit is now locked vertically.

3.Relieve the tensioning roller (2) by disconnecting the spring (3).

4.Push the lock-plate (4) forwards and press down the unit’s front edge so that it is released from the unit’s frame (5).

5.Push the unit backwards and dismantle the drive belt. Remove the hair-needle spring and release the crossbar (6) from the height adjustment.

The unit can now be pulled forward until it releases from the rear suspension.

!WARNING!

Wear protective glasses when dismantling the cutting unit. The spring which tensions up the belt can go off and cause personal injury.

2

3

5

 

4

1

6

 

Fitting of the cutting unit takes place in the reverse order to dismantling.

English – 27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents 101 89 Rider 850/970Page Contentse Safe operation practices for ride-on mowers Safety InstructionsGeneral operation II. Slope operationPart Package IV. ServiceWheel assembly USA Explanation of Symbols General use Do not do the following Driving on slopesDo as follows Children MaintenanceNever smoke in the vicinity of the battery or the fuel Location of the controls PresentationePresentation Throttle and Choke lever EpresentationClutch pedal Brake pedalCutting unit Parking brakeGear shift Lift lever for cutting unit Lever for adjustment of cutting heightFuelling PresentationSeat Starting the engine DrivingBefore starting Warm engine Cold engineDriving the machine Cutting tips Stopping the engine Starting on slopesMaintenance schedule MaintenanceeDaily Maintenance interval Hours Ance Before start 100Dismantling of the machine hoods EmaintenanceCheck the engine’s oil level MaintenanceCheck the engine’s cooling air intake Checking of the fuel pump’s air filterChecking and adjustment of the steering wires Check the level of the battery acid Adjusting the brakeCheck the safety system Checking the brakeReplacing the air filter Do not use compressed air to clean the paper filterChecking the cutting unit’s parallelism Adjustment of Rider Adjustment of the cutting unit’s parallelismDismantling the cutting unit Checking the tyre pressure Checking the bladesLubrication of front wheel bearings Changing the oilLubrication Replacement of the fuel filter Checking and adjustment of the throttle wireProblem Procedure Trouble Shooting ScheduleWinter storage ServiceEstorage Technical Data «*2T6B¬
Related manuals
Manual 6 pages 1.57 Kb

850, 970 specifications

The Husqvarna 850,970 is a remarkable addition to the lineup of Husqvarna’s powerful and versatile outdoor power equipment, tailored for professional landscapers and serious homeowners alike. This robust machine combines advanced technologies, ergonomic design, and exceptional performance, making it one of the leading choices for those who demand efficiency and reliability in their equipment.

At the heart of the Husqvarna 850,970 is its potent engine, engineered for high torque and power output. This enables the machine to tackle even the toughest tasks effortlessly. The engine features state-of-the-art technology that maximizes fuel efficiency while meeting stringent emission standards. The result is a powerful unit that runs cleaner and longer, reducing both environmental impact and operating costs.

One of the standout features of the Husqvarna 850,970 is its innovative cutting deck design. The deck is constructed from high-quality materials that ensure durability and longevity, while delivering an exceptional mowing experience. The unique blade configuration guarantees precise cutting in various grass conditions, and the adjustable cutting height allows users to customize their mowing experience based on specific requirements. This adaptability makes it suitable for a wide range of terrains, from flat lawns to uneven landscapes.

Comfort and ease of use are also at the forefront of the Husqvarna 850,970’s design. It comes equipped with an ergonomic handle and intuitive controls, allowing operators to navigate with ease and operate the machine with minimal fatigue during extended use. Additionally, the machine incorporates innovative suspension technology that absorbs impacts, ensuring a smooth ride even in challenging conditions.

Maintenance is a priority for Husqvarna, and the 850,970 reflects this commitment with features designed for easy servicing. Access to critical components is simplified, and the machine is designed to require minimal downtime for maintenance tasks, allowing users to maximize productivity.

Incorporating smart features, the Husqvarna 850,970 is compatible with the Husqvarna Connect app, which enables users to monitor their equipment remotely. This feature enhances operational efficiency, providing insights into the machine’s performance and maintenance needs.

In conclusion, the Husqvarna 850,970 stands out for its combination of power, efficiency, and user-friendly design. Ideal for both professionals and dedicated homeowners, this machine is engineered to meet the demands of modern landscaping while providing exceptional performance, comfort, and durability. Whether you're maintaining a large commercial property or your backyard oasis, the Husqvarna 850,970 is a reliable partner for all your outdoor tasks.
Top Page Image Contents