Husqvarna 968999185/ZTH5225KAA Maintenance, Engine oil, Mower blades, Safety interlock system

Page 13

MAINTENANCE

Fuel shut off valve is located at the right rear of the seat. The valve has three positions a right tank, left tank and center is the off position. FIG

-13. NOTE: EFI models the left position is the off position.

Pump release valves located at the right front corner of the pumps. Used to release the system so the machine may be moved by hand when not running. Tilt seat forward to gain access to the pumps. Use a 5/8” wrench to open valve. NOTE: Only rotate valve 1/4 turn to release system.

Fuel Valve

FIG - 13

Maintenance

WARNING: No settings, adjustments or

maintenance is to be made unless: Engine is stopped, key has been removed, park brake is on and battery cable removed from battery.

Annual inspection and maintenance from an authorized Husqvarna dealer is recommended to keep your machine in the best condition mechanically and ensures safe operation.

Engine oil

Should be checked daily before starting the machine. See the engine manufacturers manual for specifications on type of oil, filling instructions and service intervals. FIG - 14

Mower blades

Inspect blades and sharpen or replace as needed. Check blades daily or as needed. Bent, cracked or blades with large notches in them should be replaced. Sharpen to an angle of 22 to 28 degrees. Always check the balance of the blades after sharpening to prevent excessive vibration.

Safety interlock system

Check daily and never operate the machine if the system is not functioning properly. The starter should crank only when the operator is in the seat, the parking brake is applied, blade switch off and the motion control levers in the neutral slots. If the machine starts with any of these controls in an operating position, turn the machine off an repair the system immediately.

“F” Full

Operating Mark

Range

FIG - 14

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operators manual Technical Assistance Contents General use and safety rules Safety InstructionsService safety Children safetyDriving on slopes Transportation Presentation PresentationSetup Setup and AdjustmentsAdjustments Cutting HeightThrottle Lever Tension Mower Deck LevelingMotion Control Linkage Adjustment Park Brake AdjustmentOperating instructions Operating InstructionsStarting and operation ControlsOperating Instructions Maintenance MaintenanceSafety interlock system Engine oilAir filter HardwareHydraulic system Deck beltLubrication Pump beltTire pressure Caster WheelsTorque Specifications Maintenance Schedule Problem Trouble ShootingWiring Diagrams Console Harness Schematic Harness Frame Frame Harness EFI Harness

968999185/ZTH5225KAA, 968999183/ ZTH5223KOLA, 968999186/ZTH6125KAA, 968999189/ ZTH6123KOLA, 968999181/ZTH5223KAA specifications

Husqvarna has established a strong reputation in the lawn care industry, and its series of zero-turn mowers exemplifies the company's dedication to innovation, performance, and user comfort. The Husqvarna models 968999183 (ZTH5223KOLA), 968999180 (ZTH5221KAA), 968999189 (ZTH6123KOLA), 968999181 (ZTH5223KAA), and 968999175 (ZTH7226KOA) represent some of the latest advancements in mowing technology.

These zero-turn mowers are designed to enhance maneuverability, allowing users to navigate around obstacles and tight corners with ease. The zero-turning radius enables efficient mowing patterns, which translates to time savings and a cleaner lawn finish. Each model features a powerful engine, providing the necessary torque and speed to tackle various terrains and grass types, ensuring optimal cutting performance.

One notable characteristic of these models is the robust cutting deck, which is engineered for durability and reliability. The reinforced design minimizes wear and tear while delivering a professional-quality cut. The mowers are also equipped with high-performance blades that promote an even distribution of grass clippings, contributing to a healthier lawn.

In terms of comfort, Husqvarna has prioritized ergonomics in their design. Features such as adjustable, plush seats, intuitive controls, and ample legroom make prolonged mowing sessions more enjoyable. The easy-to-reach controls enhance user experience, allowing for quick adjustments without sacrificing focus on the mowing task.

Husqvarna's commitment to technology is evident in models like these. The inclusion of advanced features like a digital display offers real-time information on mower performance, fuel levels, and maintenance reminders. Additionally, some models may come equipped with Smart Technology that allows for customizable settings tailored to specific mowing conditions, ensuring maximum efficiency and effectiveness.

Another highlight is the ease of maintenance associated with these zero-turn mowers. The accessible engine and deck layout allows for quick servicing, ensuring that the machine remains in peak condition with minimal effort.

Overall, the Husqvarna ZTH series represents a perfect balance of power, precision, and comfort, making them ideal for both commercial and residential lawn care. With their advanced engineering and thoughtful features, users can expect a superior mowing experience that translates to exceptional results in lawn maintenance.
Top Page Image Contents