OPERATION
Roll Bar and Safety Belt
Operate the unit with the roll bar in the raised and locked position and use the seat belt. There is no rollover protection when the roll bar is down. If it is necessary to lower roll bar, do not wear the seat belt. Raise the roll bar as soon as clearance permits.
WARNING!
The seat belt must be used when the roll bar is in upright position.
Before Starting
1.Read the sections on Safety and Controls before starting the machine.
2.Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section).
3.Check that there is sufficient fuel in the fuel tank.
4.Make sure that the parking brake is engaged.
5.Adjust the seat to the desired position.
6.Place the steering controls in the neutral position.
Roll bar in upright position
Activate parking brake before starting
Place controls in neutral position
27