Husqvarna 7021CP owner manual Table of Contents

Page 3

•Never refuel the machine indoors.

•Never store the machine or fuel container where there is an open fl ame, spark or pilot light such as a water heater or on other appliances.

•Never fi ll containers inside a vehicle, on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before fi lling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immedi- ately.

•Never overfi ll fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE

•Never run a machine inside a closed area.

•Never make adjustments or repairs with the engine (motor) running. Disconnect spark plug wire, and keep

wire away from plug to prevent accidental starting.

•Keep nuts and bolts, especially blade attachement bolts, tight and keep equipment in good condition.

•Never tamper with safety devices. Check their proper operation regularly.

•Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

•Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

•Never attempt to make wheel height adjustments while the engine (motor) is running.

•Grass catcher components are subject to wear, dam- age, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recom- mended parts, when necessary.

•Mower blade is sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing it.

•Do not change the engine governor setting or overspeed the engine.

•Maintain or replace safety and instruction labels, as necessary.

WARNING: This lawn mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffl er is available through your nearest authorized service center.

CONGRATULATIONS on your purchase of a new lawn mower. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this lawn mower.

Please read and retain this manual. The instructions will enable you to assemble and maintain your lawn mower properly. Always observe the “SAFETY RULES”.

SERIAL

NUMBER: _________________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERSWILL BE FOUND ON A DECAL ATTACHEDTOTHE REAR OFTHE LAWN MOWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

1.6 Quarts

and Type:

(Unleaded Regular Only)

 

 

Oil Type (API SG–SL):

SAE 30 (above 32°F);

 

SAE 5W-30 (below 32°F)

 

 

Oil Capacity:

20 Ounces

 

 

Spark Plug (Gap: .030"):

Champion RC12YC

 

 

Blade Bolt Torque:

35-40 ft. lbs. (47-54 N-m)

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your lawn mower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY

4

OPERATION

5-8

MAINTENANCE SCHEDULE

9

MAINTENANCE

9-11

SERVICE AND ADJUSTMENTS

12

STORAGE

13

TROUBLESHOOTING

14

REPAIR PARTS

16-17

3 WARRANTY

20

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 7021CP III. Children Safe Operation Practices for Walk-Behind MowersII. Slope Operation General OperationTable of Contents To Remove Lawn Mower from Carton AssemblyHOW to SET UP Your Lawn Mower To Install AttachmentsMeets Cpsc Safety Requirements OperationKnow Your Lawn Mower Engine Zone Control HOW to USE Your Lawn MowerTo Adjust Cutting Height See Fig Engine SpeedBefore Starting Engine To Empty Grass Catcher See FigADD OIL See Fig Mowing Tips ADD Gasoline See FigTo Stop Engine To Start EngineBefore Each USE MaintenanceLubrication Chart General RecommendationsBlade Care Lawn MowerEngine TiresMuffler CleaningTo Change Engine OIL See Fig AIR Filter See FigRear Deflector Service and AdjustmentsTo Adjust Cutting Height To Adjust Handle See Figs thruEngine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsService Notes Page KEY Part Description Husqvarna

7021CP specifications

The Husqvarna 7021CP is a well-crafted lawn mower that stands out among its peers with an impressive combination of performance, durability, and user-friendly design. Perfectly suited for homeowners with medium to large yards, this push mower effectively handles various grass conditions thanks to its powerful engine and intelligent engineering.

At the heart of the Husqvarna 7021CP is a robust 160cc Honda GCV engine, known for its reliability and efficiency. This dependable engine allows for smooth operation and consistent cutting performance, ensuring that mowing is not only efficient but also less strenuous. The mower features a 21-inch cutting deck, constructed from high-quality steel to provide longevity and resistance against wear and tear. This size strikes an excellent balance, allowing for maneuverability in tighter spaces while still covering more ground quickly.

One of the standout features of the 7021CP is its adjustable cutting height. The mower offers six different cutting positions ranging from 1 to 4 inches, giving users the flexibility to choose the perfect length for their grass. This feature is crucial for maintaining a healthy lawn, allowing for optimal grass health and appearance.

The Husqvarna 7021CP incorporates a dual function of mulching and bagging. The mulching feature finely chops grass clippings and returns them to the lawn, providing essential nutrients and moisture back to the soil. For those who prefer a cleaner finish, the rear bagging option neatly collects clippings for easy disposal. Changing between the two modes is straightforward, enhancing convenience during mowing.

In terms of user comfort, the 7021CP is designed with ergonomics in mind. It features a comfortable handle with an adjustable height, ensuring that users of varying statures can find a suitable grip. The lightweight design further simplifies maneuvering, making it ideal for longer mowing sessions.

The mower also boasts easy-start technology, ensuring that users can quickly get to work without the frustrations often associated with starting gas mowers. Coupled with its sturdy wheels, typically larger in the back for enhanced traction, the Husqvarna 7021CP allows for smooth navigation across different terrains.

Overall, the Husqvarna 7021CP is a reliable, efficient, and user-friendly lawn mower, equipped with the necessary features to meet the demands of modern homeowners. With its robust engine, adjustable cutting height, and dual-function capabilities, it is a valuable addition to any lawn care toolkit.
Top Page Image Contents