Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, 600 C Filling Fuel Tank, Stopping in AN Emergency

Page 12

FILLING FUEL TANK

WARNING: EXPLOSIVE VAPORS and FLAMMABLE FUEL can result in serious injury or death. Handle fuel with care. ALWAYS use an approved fuel container.

No Smoking! No Lighted

Materials!

No Open Flame!

Allow engine to cool before maintenance.

Gasoline is highly flammable and must be handled with care. Allow engine to cool several minutes before removing fuel tank cap. Never fill tank when engine is running or is hot from operation. DO NOT allow open flame, matches, or smoking in area. DO NOT overfill. Allow about 1/4" of tank space for fuel expansion. Wipe up any spills and allow vapors to dissipate before starting engine. Use approved (Red) gasoline container.

To add fuel to Fuel Tank:

1.Put unit in open or well-ventilated area.

2.Stop engine and allow to cool.

3.Clean Fuel Cap and surrounding area to prevent dust, dirt and debris from entering Fuel Tank.

4.Remove Cap.

IMPORTANT: DO NOT use gasohol or gasoline containing alcohol because alcohol will cause internal parts to deteriorate. See Engine Manual for correct type and grade of fuel.

5.Fill fuel tank. (See Specifications for tank capacity.)

6.Replace Fuel Cap and tighten.

7.ALWAYS clean up any spilled fuel.

Mower Configurations

CAUTION: DO NOT operate mower unless either side discharge opening cover or side discharge deflector is installed. Objects may be picked up and thrown causing damage or personal injury. Never operate engine with rear door open unless grass bag is in place.

To configure your mower for bagging, side discharge or mulching, proceed as follows:

Bagging: Lift rear door, place bar of grass bag frame on lip of mounting flange and lower rear door. If necessary, lift rear of grass bag frame to lock in position.

Be sure there are no openings between bag and mounting surface after installing bag. If necessary clear bag mounting surface of debris.

To remove grass bag, lift rear door. Then with handle, lift bag up off mounting flange and close rear door.

CAUTION: Objects may be thrown. Check grass bag frequently for wear or deterioration. Replace worn or damaged bag with Husqvarna original equipment replacement bag only.

Side Discharge: With grass bag removed, remove two lock nuts and washers that secure side discharge opening cover to mower. Lift cover to free tabs from slots and remove cover from mower.

Position holes in side discharge deflector over studs on mower. Place tab on rear edge of deflector onto edge of discharge opening. Secure deflector with cover hardware.

WARNING: NEVER direct discharge of material toward bystanders. Do not allow anyone near equipment while unit is in operation.

Mulching: Remove grass bag and install side discharge opening cover. Open rear door and insert plug with the beveled face to the left.

Rear door should close flush.

STOPPING IN AN EMERGENCY

To stop the mower in an emergency situation, release both the engine/blade control bail and the wheel drive control bail from the handlebar. Allow all moving parts to stop before leaving operator’s position.

GB - 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 580 R, 580 RS, 580 RSE, 580 RSW, 600 C Page Controls and Features EspañolTable of Contents IntroductionSafety Safety Decals Locations Safety RulesOperational Service and Adjustments PersonalBattery electric start models MaintenanceSafety Interlock System AccessoriesAssembly AssemblyTo Remove Unit from Carton Self propelled unitsControls and Features OperationIgnition Switch electric start models Optional ControlsFilling Fuel Tank Stopping in AN EmergencyMower Configurations Starting and Shut OFF Maintenance Maintenance ScheduleMaintenance Schedule Check AIR Cleaner Briggs & StrattonCheck Engine OIL Check Mower BladeEngine Oil Check and Change Check Drive Belt Check ENGINE/BLADE ControlCheck Grass BAG General LubricationCheck Engine Cooling Check MufflerService and Adjustments Service PositionBattery Electric Start Models To Charge BatteryTo Remove Battery from Unit ENGINE/BLADE ControlNo slack Briggs & Stratton RobinDrive Belt Self propelled units Speed Control Bell CrankSelf propelled units Storage Troubleshooting AccessoriesSpecifications Warranty Statement Page 01194000A

580 R, 580 RS, 580 RSE, 580 RSW, 600 C specifications

Husqvarna is a name synonymous with quality and innovation in outdoor power equipment, and their lineup of professional brushcutters showcases just that. Among them, the Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, and 600 C models stand out, offering exceptional performance and advanced technologies tailored to meet diverse landscaping needs.

The Husqvarna 580 R is renowned for its robust construction and powerful engine. It features a reliable 50cc engine with a high power-to-weight ratio, allowing for efficient cutting performance while minimizing fatigue during extended use. The ergonomic design, including a comfortable handle and anti-vibration technology, enhances user comfort and control.

The 580 RS model builds on this foundation with added versatility. It incorporates an adjustable front handlebar, providing greater maneuverability when tackling various terrains and vegetation types. With its durable components and easy-to-start engine, the 580 RS is an ideal choice for professional landscapers seeking reliability and efficiency.

Husqvarna’s 580 RSE model emphasizes electric power, appealing to environmentally conscious users. It features a powerful electric motor that delivers torque comparable to gas-powered units, enabling effective cutting without emitting harmful fumes. Its low noise levels make it perfect for use in noise-sensitive areas. Additionally, the absence of fuel provides significant cost-saving benefits.

For those working in challenging environments, the 580 RSW model is designed with rugged durability in mind. It includes reinforced components and protective features to withstand harsh conditions, ensuring longevity and consistent performance. Its quick-release harness system facilitates swift transitions between jobs, enhancing productivity.

Finally, the Husqvarna 600 C is a commercial-grade brushcutter that combines power, efficiency, and user-friendly features. It is equipped with a high-capacity fuel tank for extended run times, ensuring that professionals can complete their tasks without frequent refueling. Its well-balanced design and advanced vibration dampening technology further enhance ease of use.

In summary, the Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, and 600 C models represent the pinnacle of brushcutter technology. With powerful engines, ergonomic designs, and specialized features catering to diverse user needs, these machines are essential tools for anyone serious about landscape maintenance. Whether you prefer a gas-powered option or seek the benefits of electric power, Husqvarna has a model that is ready to tackle any task that comes your way.
Top Page Image Contents