Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, 600 C owner manual ENGINE/BLADE Control, No slack

Page 19

3.Charge for 24 to 48 hours (battery may be charged for up to 72 hours with no harmful effects).

An engine run time of at least 8 hours is required to charge a fully discharged battery.

To Remove Battery from Unit

1.Remove wing nuts from battery U-bolt.

2.Disconnect battery from wiring.

ENGINE/BLADE CONTROL

To adjust engine/blade control:

1. Loosen cable nuts away from bracket.

Figure 16

2.Squeeze z-bend bracket at engine end of cable toward front of unit and hold in place.

No slack

4.Tighten lower

cable nut to 1/1/8”

8" (3mm)(3mm) below bracket.

Release z- bend bracket.

5.Tighten upper

cable nut until

bracket is secure between cable

nuts.

6.Engage engine/blade control. Measure distance between middle of z-bend and cable bracket. Measurement should be as shown below.

1.325"-1.788" (3.4 - 4.5 cm)

Briggs & Stratton

Robin

Briggs & Stratton

Robin

1.240" (3.15 cm)

7. If proper measurement cannot be achieved, contact your local dealer.

3.Pull cable down from bracket until there is no slack in cable.

GB - 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 580 R, 580 RS, 580 RSE, 580 RSW, 600 C Page Español Controls and FeaturesIntroduction Table of ContentsSafety Safety Rules Safety Decals LocationsOperational Personal Service and AdjustmentsAccessories Battery electric start modelsMaintenance Safety Interlock SystemSelf propelled units AssemblyAssembly To Remove Unit from CartonOperation Controls and FeaturesOptional Controls Ignition Switch electric start modelsStopping in AN Emergency Filling Fuel TankMower Configurations Starting and Shut OFF Check AIR Cleaner Briggs & Stratton MaintenanceMaintenance Schedule Maintenance ScheduleCheck Mower Blade Check Engine OILEngine Oil Check and Change General Lubrication Check Drive BeltCheck ENGINE/BLADE Control Check Grass BAGCheck Muffler Check Engine CoolingTo Charge Battery Service and AdjustmentsService Position Battery Electric Start ModelsBriggs & Stratton Robin To Remove Battery from UnitENGINE/BLADE Control No slackSpeed Control Bell Crank Drive Belt Self propelled unitsSelf propelled units Storage Accessories TroubleshootingSpecifications Warranty Statement Page 01194000A

580 R, 580 RS, 580 RSE, 580 RSW, 600 C specifications

Husqvarna is a name synonymous with quality and innovation in outdoor power equipment, and their lineup of professional brushcutters showcases just that. Among them, the Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, and 600 C models stand out, offering exceptional performance and advanced technologies tailored to meet diverse landscaping needs.

The Husqvarna 580 R is renowned for its robust construction and powerful engine. It features a reliable 50cc engine with a high power-to-weight ratio, allowing for efficient cutting performance while minimizing fatigue during extended use. The ergonomic design, including a comfortable handle and anti-vibration technology, enhances user comfort and control.

The 580 RS model builds on this foundation with added versatility. It incorporates an adjustable front handlebar, providing greater maneuverability when tackling various terrains and vegetation types. With its durable components and easy-to-start engine, the 580 RS is an ideal choice for professional landscapers seeking reliability and efficiency.

Husqvarna’s 580 RSE model emphasizes electric power, appealing to environmentally conscious users. It features a powerful electric motor that delivers torque comparable to gas-powered units, enabling effective cutting without emitting harmful fumes. Its low noise levels make it perfect for use in noise-sensitive areas. Additionally, the absence of fuel provides significant cost-saving benefits.

For those working in challenging environments, the 580 RSW model is designed with rugged durability in mind. It includes reinforced components and protective features to withstand harsh conditions, ensuring longevity and consistent performance. Its quick-release harness system facilitates swift transitions between jobs, enhancing productivity.

Finally, the Husqvarna 600 C is a commercial-grade brushcutter that combines power, efficiency, and user-friendly features. It is equipped with a high-capacity fuel tank for extended run times, ensuring that professionals can complete their tasks without frequent refueling. Its well-balanced design and advanced vibration dampening technology further enhance ease of use.

In summary, the Husqvarna 580 R, 580 RS, 580 RSE, 580 RSW, and 600 C models represent the pinnacle of brushcutter technology. With powerful engines, ergonomic designs, and specialized features catering to diverse user needs, these machines are essential tools for anyone serious about landscape maintenance. Whether you prefer a gas-powered option or seek the benefits of electric power, Husqvarna has a model that is ready to tackle any task that comes your way.
Top Page Image Contents