Husqvarna 961330018 To Replace Drive Belt See Fig, To Adjust Handle See Figs, Carburetor

Page 13

SERVICE AND ADJUSTMENTS

TO REPLACE DRIVE BELT (See Fig. 15)

1.Place new drive belt in belt retainers of debris shield.

2.Route the other end of the new drive belt through hole in housing.

3.Reinstall debris shield and blade.

4.Return mower to upright position.

5.Install new belt on gearcase pulley.

6.Reinstall belt keeper and drive cover.

NOTE: Always use factory approved belt to assure proper fit and long life.

BELT RETAINERS

DRIVE

BELT

DEBRIS

SHIELD

FIG. 15

TO ADJUST HANDLE (See Figs. 16 and 17)

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and all wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove it from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

LOWER

HANDLE

ROTATE

FIG. 16

MOWING

MOWING

POSITION

POSITION

HAIRPIN

 

 

COTTER

 

HANDLE

 

 

MOUNTING

 

BRACKET

 

 

PIN

LOW POSITION

HIGH POSITION

FIG. 17

ENGINE

Maintenance, repair, or replacement of the emission con- trol devices and systems, which are being done at the customers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer's service outlet.

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment.

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR NEAREST AUTHORIZED SERVICE CENTER, WHICH HAS PROPER EQUIPMENT AND EXPERIENCE TO

13MAKE ANY NECESSARY ADJUSTMENTS.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 5521CHV II. Slope Operation Safe Operation Practices for Walk-Behind MowersGeneral Operation III. ChildrenTable of Contents HOW to SET UP Your Lawn Mower AssemblyTo Install Attachments To Remove Lawn Mower from CartonOperation Meets Cpsc Safety RequirementsKnow Your Lawn Mower Engine Speed HOW to USE Your Lawn MowerEngine Zone Control To Convert MowerTo Empty Grass Catcher See Fig Before Starting EngineADD OIL See Fig To Stop Engine ADD Gasoline See FigTo Start Engine See Fig Mowing TipsGeneral Recommendations MaintenanceLawn Mower Lubrication ChartGrass Catcher EngineGear Case To Change Engine OIL See FigsCleaning Service and AdjustmentsTo Replace Drive Belt See Fig To Adjust Handle See FigsCarburetor Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsPage KEY Part Description Page 532 41 Warranty Statement

961330018 specifications

The Husqvarna 961330018 is a premium chainsaw designed for both professional and advanced consumer use, embodying the ideal combination of power, efficiency, and usability. Aimed at tackling demanding tasks, this model stands out due to its robust features and cutting-edge technology tailored for optimal performance.

At the heart of the Husqvarna 961330018 is a powerful engine that delivers exceptional cutting performance. The chainsaw comes equipped with a high-performance 60cc motor that generates impressive horsepower, allowing users to cut through dense wood and tough materials with ease. The engine is designed to reduce emissions, ensuring that it meets environmental regulations while still providing the power you need for heavy-duty tasks.

One of the key technologies integrated into this chainsaw is the Fuel Efficiency technology, which optimizes fuel usage and enhances overall runtime. With its advanced ignition system, the chainsaw starts easily and runs smoothly, minimizing downtime and enhancing productivity. The fuel tank is designed for extended operation, allowing users to complete more tasks without frequent refueling.

Another noteworthy feature is the X-Torq engine technology. This innovation minimizes fuel consumption and reduces exhaust emissions, providing a more environmentally friendly solution without compromising power. It's particularly valuable for professionals who need a reliable tool that aligns with sustainable practices.

User comfort and safety are also prioritized in the design of the Husqvarna 961330018. The chainsaw is equipped with an ergonomic handle and low-vibration technology, which reduces hand fatigue during extended use. The automatic chain lubrication system ensures that the chain remains lubricated for smoother operation, while the quick-release air filter and easy-access side-mounted chain tensioning system simplify maintenance.

The chainsaw features a durable construction, built to withstand the rigors of heavy use. Its lightweight design facilitates maneuverability, making it easier to handle in various cutting scenarios, whether you're felling trees or trimming branches.

In summary, the Husqvarna 961330018 is a powerful and efficient chainsaw that caters to the needs of both professionals and dedicated enthusiasts. With its advanced technologies, user-friendly features, and commitment to sustainability, this model represents a benchmark in chainsaw performance and reliability, making it an excellent choice for tackling a wide range of cutting tasks.
Top Page Image Contents