Husqvarna 961330018 Before Starting Engine, To Empty Grass Catcher See Fig, ADD OIL See Fig

Page 7

OPERATION

SIDE DISCHARGING (See Fig. 6)

•Rear door must be closed.

•Open mulcher door and install discharge deflector under door as shown.

•Mower is now ready for discharging operation.

•To convert to mulching or bagging operation, discharge deflector must be removed and mulcher door must be closed.

OPEN MULCHER DOOR

INSTALL

DISCHARGE

DEFLECTOR

MOWER IS NOW READY FOR

DISCHARGING OPERATION

FIG. 6

SIMPLE STEPS TO REMEMBER

WHEN CONVERTING YOUR LAWN MOWER

FOR MULCHING -

 

 

1.

Rear door closed.

2.

Mulcher door closed.

FOR REAR BAGGING -

 

 

1.

Grass catcher installed.

2.

Mulcher door closed.

FOR SIDE DISCHARGING -

 

 

1.

Rear door closed. 2. Discharge deflector installed. 7

CAUTION: Do not run your lawn mower without rear door closed or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open.

TO EMPTY GRASS CATCHER (See Fig. 7)

1.Lift up on grass catcher using the frame handle.

2.Remove grass catcher with clippings from under lawn mower handle.

3.Empty clippings from bag.

NOTE: Do not drag the bag when emptying; it will cause unnecessary wear.

FRAME

HANDLE

FIG. 7

BEFORE STARTING ENGINE

ADD OIL (See Fig. 8)

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see “ENGINE” in the Maintenance section of this manual.

CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muf- fler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the unit. Slowly pour the entire container down the oil fill spout into the engine.

4.Insert and tighten dipstick.

IMPORTANT:

•Check oil level before each use. Add oil if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of operation or each season. You may need to change the oil more often un- der dusty, dirty conditions. See “TO CHANGE ENGINE OIL” in the Maintenance section of this manual.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 5521CHV III. Children Safe Operation Practices for Walk-Behind MowersII. Slope Operation General OperationTable of Contents To Remove Lawn Mower from Carton AssemblyHOW to SET UP Your Lawn Mower To Install AttachmentsOperation Meets Cpsc Safety RequirementsKnow Your Lawn Mower To Convert Mower HOW to USE Your Lawn MowerEngine Speed Engine Zone ControlTo Empty Grass Catcher See Fig Before Starting EngineADD OIL See Fig Mowing Tips ADD Gasoline See FigTo Stop Engine To Start Engine See FigGeneral Recommendations MaintenanceLawn Mower Lubrication ChartTo Change Engine OIL See Figs EngineGrass Catcher Gear CaseCleaning Service and AdjustmentsTo Replace Drive Belt See Fig To Adjust Handle See FigsCarburetor Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsPage KEY Part Description Page 532 41 Warranty Statement

961330018 specifications

The Husqvarna 961330018 is a premium chainsaw designed for both professional and advanced consumer use, embodying the ideal combination of power, efficiency, and usability. Aimed at tackling demanding tasks, this model stands out due to its robust features and cutting-edge technology tailored for optimal performance.

At the heart of the Husqvarna 961330018 is a powerful engine that delivers exceptional cutting performance. The chainsaw comes equipped with a high-performance 60cc motor that generates impressive horsepower, allowing users to cut through dense wood and tough materials with ease. The engine is designed to reduce emissions, ensuring that it meets environmental regulations while still providing the power you need for heavy-duty tasks.

One of the key technologies integrated into this chainsaw is the Fuel Efficiency technology, which optimizes fuel usage and enhances overall runtime. With its advanced ignition system, the chainsaw starts easily and runs smoothly, minimizing downtime and enhancing productivity. The fuel tank is designed for extended operation, allowing users to complete more tasks without frequent refueling.

Another noteworthy feature is the X-Torq engine technology. This innovation minimizes fuel consumption and reduces exhaust emissions, providing a more environmentally friendly solution without compromising power. It's particularly valuable for professionals who need a reliable tool that aligns with sustainable practices.

User comfort and safety are also prioritized in the design of the Husqvarna 961330018. The chainsaw is equipped with an ergonomic handle and low-vibration technology, which reduces hand fatigue during extended use. The automatic chain lubrication system ensures that the chain remains lubricated for smoother operation, while the quick-release air filter and easy-access side-mounted chain tensioning system simplify maintenance.

The chainsaw features a durable construction, built to withstand the rigors of heavy use. Its lightweight design facilitates maneuverability, making it easier to handle in various cutting scenarios, whether you're felling trees or trimming branches.

In summary, the Husqvarna 961330018 is a powerful and efficient chainsaw that caters to the needs of both professionals and dedicated enthusiasts. With its advanced technologies, user-friendly features, and commitment to sustainability, this model represents a benchmark in chainsaw performance and reliability, making it an excellent choice for tackling a wide range of cutting tasks.
Top Page Image Contents