Husqvarna 96143004500 Service and Adjustments, To Adjust Cutting Height, Rear Deflector

Page 12

SERVICE AND ADJUSTMENTS

CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deflector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT (See Fig. 13)

1.Remove drive cover.

2.Remove belt from gearcase pulley by pushing down on arm and rolling belt off pulley.

3.Turn lawn mower on its side with air filter and carbu- retor down.

4.Remove blade, engine pulley and debris shield.

5.Remove engine pulley and belt from debris shield.

PUSH

DOWN

BELT

DRIVE

COVER

PULLEY

FIG. 13

TO REPLACE DRIVE BELT (See Fig. 14)

1.Place new drive belt in engine pulley and belt retainer of debris shield.

2.Route the other end of the new drive belt through hole in housing.

3.Reinstall debris shield.

4.Reinstall blade.

5.Return mower to upright position.

6.Push down on arm, install new belt on gearcase pulley. Release arm slowly.

NOTE: Always use factory approved belt to assure proper fit and long life.

ENGINE PULLEY

BELT

BELT RETAINER

DEBRIS SHIELD

FIG. 14

TO ADJUST HANDLE (See Figs. 15 thru 17)

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and all wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

 

SQUEEZE

 

TO ADJUST

LOWER HANDLE

MOUNTING PIN

HANDLE

HAIRPIN

BRACKET

COTTER

FIG. 15

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 62522FE Safe Operation Practices for Walk-Behind Mowers II. Slope OperationGeneral Operation III. ChildrenTable of Contents Assembly To Install AttachmentsTo Prepare Battery See Fig To Remove Lawn Mower from CartonMeets Cpsc Safety Requirements OperationKnow Your Lawn Mower HOW to USE Your Lawn Mower Engine SpeedEngine Zone Control To Convert MowerSimple Steps to Remember When Converting Your Lawn Mower Before Starting EngineTo Empty Grass Catcher See Fig ADD OIL See FigADD Gasoline See Fig To Stop EngineTo Start Engine Mowing TipsMaintenance Lubrication ChartGeneral Recommendations Before Each USELawn Mower Cleaning Clean Under Drive CoverEngine MufflerService and Adjustments To Adjust Cutting HeightRear Deflector Storage CarburetorBattery OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionPage KEY Part Description Page KEY Part Description Limited Warranty Husqvarna S Obligations Under the Warranty

532424698, 96143004500 specifications

The Husqvarna 96143004500, also known as the Husqvarna 532424698, is a premium riding mower designed to meet the needs of both homeowners and professionals seeking an efficient and reliable lawn maintenance solution. Renowned for its powerful performance and advanced features, this mower stands out in the crowded market of lawn care equipment.

One of the main highlights of the Husqvarna 96143004500 is its robust engine. It is powered by a modern, high-torque engine that provides exceptional cutting power and efficiency. The engine is designed for optimal fuel economy, allowing users to cover more ground with fewer refueling stops. This is particularly beneficial for large lawns or properties with extensive landscaping.

The cutting deck of the Husqvarna 532424698 is another key feature. Equipped with a wide, durable steel cutting deck, this mower ensures a clean and precise cut across various grass types. With adjustable cutting heights, users can easily customize the deck's height to achieve their desired grass length, ensuring a perfectly manicured lawn.

In terms of technology, the Husqvarna 96143004500 incorporates advanced features that enhance usability and performance. The integrated cutting system provides superior airflow, resulting in better grass clipping distribution and mulching capability. Additionally, the mower's intuitive control panel ensures that all essential functions are easy to access and operate.

Another notable characteristic is its ergonomic design. The seat is designed for maximum comfort, allowing users to mow for extended periods without fatigue. The steering wheel is positioned for easy maneuverability, making it simple to navigate around obstacles while maintaining control.

Safety is also a top priority with the Husqvarna 532424698. It comes equipped with features like a safety brake and intuitive parking brakes, ensuring that the mower can be operated safely, even on slopes. The mower’s sturdy construction ensures durability, making it a long-lasting investment for lawn care enthusiasts.

Moreover, the Husqvarna 96143004500 is compatible with various attachments and accessories, enhancing its versatility for tasks beyond simple mowing. Whether one needs to mulch leaves, clear snow, or tow small carts, this mower can easily adapt to various lawn care tasks.

In conclusion, the Husqvarna 96143004500,532424698, is engineered for those who seek superior performance, advanced technology, and comfort in a riding mower. With its impressive features and ergonomic design, this mower is undoubtedly an excellent choice for achieving a happy and healthy lawn.
Top Page Image Contents