Assembly, To Remove Lawn Mower from Carton

ASSEMBLY

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower.

IMPORTANT: THIS LAWN MOWER IS SHIPPED WITHOUT OIL OR GASOLINE IN THE ENGINE.

Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

TO REMOVE LAWN MOWER FROM CARTON

1.Remove loose parts included with mower.

2.Cut down two end corners of carton and lay end panel down flat.

3.Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.

4.Roll lawn mower out of carton and check carton thor- ougly for additional loose parts.

HOW TO SET UP YOUR LAWN MOWER

TO UNFOLD HANDLE (See Fig. 1)

IMPORTANT: UNFOLD HANDLE CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.

1.Raise handles until lower handle section locks into place in mowing position.

2.Remove protective padding, raise upper handle section intoplaceonlowerhandleandtightenbothhandleknobs.

3.Remove handle padding holding operator presence control bar to upper handle.

Your handles may be adjusted for your mowing comfort. Refer to “ADJUST HANDLE” in the Service and Adjustments section of this manual.

OPERATOR	MOWING
PRESENCE	POSITION
CONTROL
BAR
	LIFT UP

LIFT	UPPER
UP	HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

TO ASSEMBLE GRASS CATCHER (See Fig. 2)

1.Put grass catcher frame into grass bag with rigid part of bag on the bottom. Make sure the frame handle is outside of the bag top.

2.Slip vinyl bindings over frame.

NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using.

FRAME

HANDLE

VINYL	FRAME
BINDINGS	OPENING

FIG. 2

TO INSTALL ATTACHMENTS

Your lawn mower was shipped ready to be used as a mulcher. To convert mower to bagging or discharging, see “TO CONVERT MOWER” in the Operation section of this manual.

TO PREPARE BATTERY (See Fig. 3)

NOTE: Your battery must be charged before you can start your lawn mower.

1.Connect battery charger connector (male) to harness connector (female).

2.Plug battery charger into 110 volt A.C. outlet.

3.Leave battery charger connected for 24 hours before starting your engine for the first time.

4.After charging, disconnect harness connector (female) from battery charger connector (male).

Connect your battery charger to charge battery as required.

IMPORTANT: THE ENGINE WILL NOT RECHARGE YOUR BATTERY. ATTHEENDOFTHEMOWINGSEASONTHEBATTERY SHOULD BE CHARGED FOR 48 HOURS TO PROTECT THE BATTERY DURING WINTER STORAGE.

CAUTION: Always disconnect the en- gine connector (male) from the battery connector(female)topreventaccidental starting when transporting or storing your lawn mower after the season.

		ENGINE	HARNESS
		CONNECTOR	CONNECTOR
	BATTERY	(MALE)	(FEMALE)
	BATTERY
	BOX
	BATTERY		CHARGER
	CHARGER		CONNECTOR (MALE)
4		FIG. 3

532424698, 96143004500 specifications

The Husqvarna 96143004500, also known as the Husqvarna 532424698, is a premium riding mower designed to meet the needs of both homeowners and professionals seeking an efficient and reliable lawn maintenance solution. Renowned for its powerful performance and advanced features, this mower stands out in the crowded market of lawn care equipment.

One of the main highlights of the Husqvarna 96143004500 is its robust engine. It is powered by a modern, high-torque engine that provides exceptional cutting power and efficiency. The engine is designed for optimal fuel economy, allowing users to cover more ground with fewer refueling stops. This is particularly beneficial for large lawns or properties with extensive landscaping.

The cutting deck of the Husqvarna 532424698 is another key feature. Equipped with a wide, durable steel cutting deck, this mower ensures a clean and precise cut across various grass types. With adjustable cutting heights, users can easily customize the deck's height to achieve their desired grass length, ensuring a perfectly manicured lawn.

In terms of technology, the Husqvarna 96143004500 incorporates advanced features that enhance usability and performance. The integrated cutting system provides superior airflow, resulting in better grass clipping distribution and mulching capability. Additionally, the mower's intuitive control panel ensures that all essential functions are easy to access and operate.

Another notable characteristic is its ergonomic design. The seat is designed for maximum comfort, allowing users to mow for extended periods without fatigue. The steering wheel is positioned for easy maneuverability, making it simple to navigate around obstacles while maintaining control.

Safety is also a top priority with the Husqvarna 532424698. It comes equipped with features like a safety brake and intuitive parking brakes, ensuring that the mower can be operated safely, even on slopes. The mower’s sturdy construction ensures durability, making it a long-lasting investment for lawn care enthusiasts.

Moreover, the Husqvarna 96143004500 is compatible with various attachments and accessories, enhancing its versatility for tasks beyond simple mowing. Whether one needs to mulch leaves, clear snow, or tow small carts, this mower can easily adapt to various lawn care tasks.

In conclusion, the Husqvarna 96143004500,532424698, is engineered for those who seek superior performance, advanced technology, and comfort in a riding mower. With its impressive features and ergonomic design, this mower is undoubtedly an excellent choice for achieving a happy and healthy lawn.