CONTROLS
This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs & Stratton
Transmission from the engine is made via
Control Locations
4
5
5
6
7 | 8 | 9 |
| ||
|
|
1. | Motion control levers | 6. | Ignition switch | |
7. | Hour meter | |||
2. | Parking brake | |||
8. | Throttle control | |||
3. | Tracking knob | |||
9. | Blade switch | |||
4. | Fuel tank | |||
|
| |||
5. | Hydro release levers |
|
|
3
2
1
13
12
11
10
10.Seat adjustment lever
11.Right tracking bolt
12.Height adjustment
13.Deck lift
*The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables.
17