Husqvarna 115 312526R1, 966502301, MZ6128 manual Deck Belt Removal, Deck Belt Installation

Page 38

maintenance

Deck Belt

Deck Belt Removal

Park on a level surface. Apply park brake.Lower the deck into the lowest cutting position.

1.Remove foot plate and belt shields.

2.Using a ratchet or breaker bar with a 9/16" socket on the spring idler bolt, relieve the tension on the belt.

3.Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface.

4.Carefully roll the belt over the top of the cutter housing pulleys.

5.Remove the belt from around the electric clutch on the engine shaft and off the mower deck.

80158-063

Slackening the belt tensioner

Deck Belt Installation

NOTE: For ease in installing the deck belt, refer to the routing decal on the deck.

1.Wrap the deck belt around the electric clutch pulley that is located on the engine shaft.

2.Route the belt forward between the spring loaded and stationary pulleys.

3.Place belt around spring loaded idler pulley.

4.Wrap the belt around the stationary idler pulley and around the mandrel housings.

5.Push inward on the idler arm and carefully route belt over stationary idler pulley. Once belt is properly routed, slowly release idler arm to tension belt.

6.Check that there are not twists in the belt and that the routing matches the routing decal.

7.Replace belt shields on both mandrel housings and secure with fasteners.

1

7

 

3

4

2

 

 

 

 

 

 

6

 

 

 

 

5

 

 

 

 

 

8058-061

Belt routing, deck belt

 

 

 

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Manual Performing any General Operation SafetySafety Instructions Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsMotion Control Levers Hour Meter TrackingParking Brake Blade SwitchIgnition Switch Fuses Fuel Shut Off Valve Cutting Height AdjusterSeat Adjustment Lever Refueling Steering OperationTraining Before Starting Starting the EngineDisengage the mower blades by depressing the blade switch Open the fuel tank valve To remove cables, reverse order Weak BatteryJumper Cables Ensure that no one is near mower when engaging blade switch RunningOperating on Hills Stopping the Engine Mowing Tips Manual Transport Maintenance Maintenance Battery Replacing batterySafety System Tire PressuresDeck Belt Removal Deck Belt InstallationDeck Belt Belts Belt InstallationPump Belt Replacing Pump BeltCutting Blades Adjusting the Mower Deck Leveling deckAnti-scalp rollers Caster Wheels CleaningUse protective glasses when cleaning and washing HardwareGeneral LubricationLubrication Schedule Front Wheel Bearings Wheel and Deck ZerksFront Wheel Mount Deck SpindlesTransaxle Transmission Fluid Change Purging Procedures Troubleshooting guide Problem CauseTroubleshooting guide Winter Storage ServiceStorage Engine Pigtail PUR WHT GRY Technical Data MZ6128Standard Hardware Torque SpecificationsHex Head Cap Screws Metric Standard HardwareUSA requirements CE requirementsAction Service JournalDelivery Service Stamp, signAfter 10 hours Date, mtr reading Stamp, signDaily Service Hour Service Service Journal Service Journal At least once each year Page Page 115 312526R1 10/21/09

966502301, 115 312526R1, MZ6128 specifications

The Husqvarna MZ6128 is a significant addition to Husqvarna's impressive lineup of zero-turn mowers, designed specifically for homeowners and professionals seeking superior performance, durability, and ease of use.

One of the key features of the MZ6128 is its robust 28-horsepower engine, engineered to provide ample power for mowing large areas efficiently and effectively. This powerful engine, combined with a cutting width of 61 inches, allows users to cover substantial ground in less time, making lawn care a less time-consuming task. The mower also features a fabricated cutting deck, which enhances durability and longevity, ensuring that it withstands the rigors of regular landscaping duties.

The MZ6128's zero-turn capability is another standout characteristic. The design allows for unparalleled maneuverability, enabling the mower to navigate tight spaces and perform sharp turns with precision. This feature is particularly beneficial for homeowners with intricate lawn layouts or professional landscapers who require agility while mowing.

In terms of comfort and usability, Husqvarna has equipped the MZ6128 with a high-back seat that provides excellent support for extended periods of mowing. The ergonomic controls are designed to reduce user fatigue, enhancing overall user experience. Additionally, the large, durable rear wheels ensure stability and traction across various terrains, including uneven ground.

The mower's integrated hydrostatic transmission offers smooth acceleration and easy control over speed adjustments, allowing users to tailor their mowing experience based on conditions. This feature ensures that the MZ6128 can handle various grass types and heights without straining the engine.

Maintenance is made easy with the MZ6128, thanks to accessible components and a straightforward design, which helps users perform regular checks and servicing without hassle. Husqvarna's commitment to quality is evident in the build and materials, reducing the frequency of repairs and the overall long-term cost of ownership.

Overall, the Husqvarna MZ6128 exemplifies a blend of performance, comfort, and durability, making it a valuable investment for anyone serious about maintaining a pristine lawn. Whether for residential use or professional landscaping, the MZ6128 stands out as a reliable and efficient solution for a variety of mowing needs.
Top Page Image Contents