OPERATING INSTRUCTIONS
Run engine full throttle to make sure wheels do not rotate. Readjust if any rotation occurs.
Repeat the whole process for the opposite side and tighten the nuts against the ball joints.
Turn machine off.
Reinstall the seat rod and check the wiring harness to the seat safety switch for a good connection and return the seat to the normal position.
Operating instructions
Starting and operation
Operator must be sitting in the seat. Engage the park brake, blades disengaged and the motion control levers in the neutral slots.
Set choke (if needed) turn key and release as soon as engine starts. Adjust throttle to half and shut choke off.
Release parking brake.
Close motion control levers.
Engage blades and set RPM to maximum. CAUTION: Be sure all persons are clear of the area before engaging blades.
Controls
Be familiar with all controls their function and how to operate them before starting the ma- chine.
Motion control levers on each side of the con- sole control the direction of movement. See page 7. The left lever controls the flow of oil from the left hydro pump to the left wheel motor. The right lever controls the flow of oil from the right hydro pump to the right wheel motor.
NOTE: To begin motion the operator must be in the seat and the parking brake disengaged before the motion control levers can be moved from the neutral slots or the engine will kill. FIG - 9
Motion Control Lever Pattern
(Right Side)
FIG - 9
11