Husqvarna 968999224 / ZTH6127KOB manual Hardware, Air filter, Hydraulic system, Deck belt

Page 20

MAINTENANCE

Hardware

Check daily. Inspect the entire machine for loose or missing hardware.

Air filter

See engine manufacturers specifications for cleaning and replacement intervals.

Hydraulic system

Check oil level in tank daily. Oil level should be 3/4” to 1” below the top of the tank. Check all fittings, hoses and lines for damage or leaks. Replace or repair any questionable lines or fittings.

Change the oil and filter after the first 250 hours of operation then annually after that. Drain tank and remove filter, be sure to clean around the tank and filter head before removal. Replace filter and drain plug and refill hydraulic tank. Only use MOBIL 1 synthetic oil. FIG - 15

Raise and block up the rear of the machine so the drive wheels can rotate freely. Start the engine at the lowest RPM possible, move the motion control levers forward and run machine for several minutes. Stop engine and recheck the oil level.

If the wheels do not respond an air lock has occurred within the system. The system must be bled off of air or let the machine set overnight to allow the air time to dissipate out of the oil. DO NOT run the machine with an air lock serious damage can occur to the pumps and wheel motors.

Deck belt

Check every 75 to 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks in normal operation.

To replace belt lower the deck to its lowest position. Remove the foot plate and belt shields. Use a ratchet with a 9/16” socket on the spring idler bolt to relieve the tension on the belt. Slide the belt off of pulley and fully remove the belt. Reverse the procedure for installation. See the decal on the top of deck for belt routing informa- tion. FIG - 16. After installation is complete check the belt for twists.

ONLY USE

Tri-Synthetic Formula

0

FIG - 15

FIG - 16

20

Image 20
Contents Operators manual Manual no REV. IR 09/01/03Husqvarna. All rights reserved Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsGeneral Use Safety InstructionsSafety Instructions Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationPresentation PresentationSetup and Adjustments SetupAdjustments Cutting HeightMower Deck Leveling Throttle Lever TensionPark Brake Adjustment Motion Control Linkage AdjustmentOperating Instructions Operating instructionsStarting and operation ControlsOperating Instructions Maintenance Safety interlock systemCutter Housings Engine oilHardware Air filterHydraulic system Deck beltPump belt LubricationTire pressure Caster WheelsTorque Specifications Maintenance Schedule Trouble Shooting ProblemWiring Diagrams Console Harness Schematic Harness Frame Frame Harness

968999224 / ZTH6127KOB, 968999225 / ZTH7227KOB, 968999189 / ZTH6123KOLA specifications

Husqvarna has long been a trusted name in outdoor power equipment, and their ZTH series of zero-turn mowers further cements this reputation. Among the offerings are the models 968999224 (ZTH6127KOB), 968999225 (ZTH7227KOB), and 968999189 (ZTH6123KOLA), each designed to deliver exceptional performance and efficiency for both residential and commercial users.

The ZTH6127KOB is equipped with a robust 27 HP engine, providing ample power for tackling large lawns with heavy grass and uneven terrain. Its 61-inch cutting deck ensures a wide cutting path, allowing for faster mowing and reduced time spent on the job. The deck features an innovative design that optimizes airflow for cleaner cuts and better grass lift, resulting in a superior finish.

The ZTH7227KOB takes things a step further with its powerful 27 HP engine and expansive 72-inch cutting deck. This model is particularly well-suited for commercial landscapers who need to cover large areas quickly. The mower’s heavy-duty frame and reinforced components ensure durability and reliability under demanding conditions.

Meanwhile, the ZTH6123KOLA, with its 23 HP engine, offers a slightly smaller yet highly efficient option. Its 61-inch cutting deck strikes the perfect balance for homeowners and small commercial operations looking for an agile yet powerful mower. All models come equipped with intuitive controls and ergonomic seating designed for hours of comfortable operation.

Technologically, all three models boast advanced features such as electronic fuel injection, which enhances fuel efficiency and provides smoother acceleration. The Hydro-Gear transmission ensures a responsive and agile maneuverability, allowing operators to navigate tight spaces with ease. The mowers also feature easy-to-use height adjustment systems for customizing cutting heights based on grass types and conditions.

Safety is a priority, and Husqvarna has equipped these models with ROPS (Roll Over Protection System) and an automatic blade brake that enhances operator safety while in operation. Each model combines high performance, efficiency, and comfort, making them ideal choices for anyone seeking a reliable solution for lawn maintenance.

From commercial users to homeowners, the ZTH series by Husqvarna proves to be an investment in quality and performance, reaffirming the brand’s commitment to excellence in lawn care technology.