Marantz CD5004 manual Playing MP3 and WMA files, NDisplaying text information, Repeat

nDisplaying text information

When [TEXT] is pressed each time, the display switches text information in the following order.

During playback, mainly information about the currently playing file will be displayed.

File Name (currently playing)

Playing MP3 and WMA files

1Set a CD-R/RW disc that contains MP3 or WMA format music files in the disc tray (vpage 3).

2Press [MENU] to select “MP3/WMA Mode”. Set “Cont. mode” or “Folder mode” (vpage 16).

To Switch the Folder or File During Playback

ENGLISH

Playback of MP3 and WMA files

nPlaying repeatedly (Repeat playback)

Press [REPEAT] to select repeat mode.

•When [REPEAT] is pressed each time, the display switches repeat modes in the following order.

All-track repeat	Folder repeat
“RPT”	“RPT” flashes
Repeat off	1-track repeat
(Not Displayed)	“RPT1”

Getting started Basic connections Basic

Song Title

Artist Name

GTo change a folderH

Use [PITCH –, +] to select a folder and press [ENTER]. GTo change a fileH

Use [8, 9] or <8/6, 7/9> to select a file.

When you use a CD-R/RW disc, this unit automatically sets the playback order. For further information, refer to “Playback of MP3 and WMA files” (vpage 17).

Stopping Playback

GSelectable itemsH

All-track repeat “RPT”

Folder repeat “RPT” flashes

1-track repeat “RPT1”

Repeat off

(Not Displayed)

:All tracks are played repeatedly.

:Tracks in a folder are played repeatedly.

:Only 1 track is played repeatedly.

:Normal playback resumes.

operation Advanced connections

Album Name

Year (created)

Comment

Time Display

•Only alphanumeric characters can be displayed.

•The type of text information recorded in a file can be different depending on the method used to write a file and the CD writing software. Unrecorded text information is not displayed.

•When a CD is not playing, only the number of files on the disc that can be played is displayed.

NOTE

Depending on the MP3 or WMA file being played, text information may not be displayed.

Press 2.

Stopping Playback temporarily

Press 3.

The “3” is displayed.

• To restart playback, press 3 again.

Fast-Forwarding and Fast-Reversing (searching)

During playback, press and hold in [6, 7] or <8/6, 7/9>.

•When you remove your finger from the button, normal playback is resumed.

•When normal playback is resumed after searching, the sound may be interrupted momentarily.

nRepeat Playback Between Specified Points (A-B

Repeat)

1During playback, press [A-B]at the desired starting point (A).

The “A-” indicator on the display lights.

2 Press the [A-B]again at the desired ending point (B). The “B-” indicator on the display lights and the selected part (from point A to point B) is played repeatedly.

•To stop A-B repeat playback and resume normal playback, press [A-B] again. The “A-B” indicator goes off.

NOTE

•The A-B repeat play function cannot be used during random play.

•There are cases in which difficulties will be experienced, when setting the B point, if the file’s bit rate is low.

Advanced operations Explanation of terms Troubleshooting Specifications Index

18