Husqvarna 355 manual Changing a broken or worn starter cord, Starter device assembly

Page 30

MAINTENANCE

Starter device

WARNING!

•When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

•Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

• Loosen the screws, that hold the starter device against the crankcase and remove the starter device.

• Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set the recoil spring by letting the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

• Insert and fasten a new starter cord in the pulley. Wind approx. 3 turns of the starter cord on to the pulley. Assemble the starter pulley against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

•Lift the starter cord up in the notch on the starter pulley

and turn the starter pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

• Lift the starter pulley (see "Changing a broken or worn starter cord"). Bear in mind that the return spring sits under tension in a cassette.

•Dismantle the cassette with the return spring from the starter.

• Lubricate the recoil spring with thin oil. Assemble the cassette with return spring in the starter. Fit the starter pulley and tension the return spring.

Starter device assembly

•Assemble the starter device, by pulling the starter cord out first, then place the

starter against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

• Assemble and tighten the screws, which hold the starter.

30 – English

Page 29 Page 31
Image 30
Page 29 Page 31
Contents 355 101 91KEY to Symbols SymbolsContents Safety Instructions Chain SAW Safety EquipmentChain brake and front hand guard Throttle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the inertia brake release Checking brake band wearChecking the front hand guard Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesSaw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Risk of kickback is increased with a badly sharpened chainGeneral advice on setting raker clearance Setting the raker clearanceTensioning the chain Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oilChecking wear on cutting equipment Needle bearing maintenanceChecking chain lubrication Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed General Safety Precautions Min m10 ft Basic safety rules General Working InstructionsTerms Basic cutting techniqueGeneral CuttingLimbing Tree felling techniqueSafe distance Felling directionClearing the trunk and preparing your retreat FellingCutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped treeWhat is WHAT? What is what?Assembly Mounting guide bar and chainFuel Handling FuelmixMin 3 m FuellingChain oil 10ftStart Start and StopStart and stop StopMaintenance CarburetorChanging a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil springMuffler Needle bearing maintenance Spark plugAir filter IMPORTANT! a damaged air filter must always be replacedCooling system Adjustment of the oil pumpCentrifugal cleaning Air Injection Winter useWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data 355Emission Control Warranty Statement Your Warranty Rights Obligations2001W20
Related manuals
Manual 4 pages 16.24 Kb Manual 5 pages 11.13 Kb

355 specifications

The Husqvarna 355 is a powerful and versatile chainsaw designed for professionals and avid woodworkers alike. This model is engineered to deliver optimal performance, efficiency, and reliability, making it a popular choice for various cutting tasks in forestry, landscaping, and wood processing.

One of the standout features of the Husqvarna 355 is its robust 50.2cc engine, which provides sufficient power for demanding cutting jobs. The chainsaw operates at a speed of up to 9,000 RPM, ensuring efficient and smooth cuts through even the toughest of materials. The air injection system plays a crucial role in enhancing the engine's performance by removing larger dust and debris particles before they can enter the air filter. This results in reduced filter cleaning and increased overall engine life.

The Husqvarna 355 is also designed with user comfort in mind. It includes an ergonomic handle that minimizes vibrations during operation, making prolonged use less taxing on the operator. Additionally, the lightweight design of the chainsaw allows for greater maneuverability, ensuring that users can navigate through various cutting scenarios without fatigue.

Safety is paramount in the design of the Husqvarna 355. It features a low kickback chain that significantly reduces the risk of kickback injuries, a common concern among chainsaw users. The chain brake system offers an added layer of protection, automatically engaging if the chainsaw experiences sudden upward movement. Furthermore, the chainsaw includes a throttle lock and a comfortable rear handle, ensuring safe operation.

Maintenance is simplified with the Husqvarna 355, thanks to its quick-release air filter and easy-access spark plug. These features allow users to perform maintenance tasks efficiently, ensuring the chainsaw remains in peak condition and ready for use.

Incorporating advanced technology, the Husqvarna 355 utilizes the X-Torq engine, which reduces fuel consumption and emissions. This environmentally friendly design contributes to making the chainsaw compliant with various regulations concerning emissions, while also lowering operational costs for users.

Overall, the Husqvarna 355 stands out in the competitive chainsaw market due to its combination of power, versatility, user-friendly features, and safety systems. Whether tackling large trees or performing detailed woodworking tasks, this chainsaw promises reliability and efficiency for both professionals and hobbyists.
Top Page Image Contents