Husqvarna RZ46215 warranty Battery, Cleaning battery and terminals, Replacing battery

Page 24

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times.

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to lose power.

1.Open the terminal access doors.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly.

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

3.Position deck to lowest setting.

4.Front underside of frame, remove the nuts that secure the battery hold-down.

CAUTION! Always wear eye protection when around batteries.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold-down and secure with nuts removed in Step 4.

8.Reconnect RED battery cable to positive (+) battery terminal with bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut

10.Replace terminal boot cover.

11.Lower seat

WARNING! Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

IMPORTANT INFORMATION Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

24

Image 24
Contents Operator Manual Conformity Certificates USA requirementsContents Introduction Good Service Manufacturing NumberSymbols and Decals Safety Safety InstructionsPersonal Safety Equipment General OperationSlope Operation Safe Handling of GasolineChildren General Maintenance Transport Spark ArrestorControls Control LocationsIgnition Switch Steering Control LeversPark Brake Throttle Control Blade Switch Service MinderChoke Control Seat Adjustment Lever Cutting Height Lever Bypass LinkagesFuel Shut Off Valve Fuel Tank Tracking KnobOperation TrainingSteering Before StartingUSE Full Throttle When Mowing Starting the EngineRunning Stopping the EngineMowing Tips Weak Battery Operating On HillsJumper Cable Use To remove cables, reverse orderMoving Machine By Hand Maintenance Maintenance ScheduleAt least Maintenance interval Daily Once Hours Before After Year 100 300Before After Year Battery Cleaning battery and terminalsReplacing battery Safety System Tire PressuresCaster Wheels BeltsAnti-scalp Rollers Adjusting the Mower Deck Leveling deckCleaning Blade replacementCutting Blades HardwareLubrication Wheel and Deck ZerksTransmission Engine Oil Change Troubleshooting Problem / CauseService StorageWinter Storage Schematic Technical Data DimensionsEngine Frame TransmissionTorque Specifications AccessoriesStandard Hardware Metric Standard HardwareService Journal Delivery ServiceAction Date, mtr reading, stamp, sign Hour Service ActionPerform the 50-hour service At Least Once Each Year 115 667527 Rev a 2013-11-15
Related manuals
Manual 60 pages 10.11 Kb

RZ46215 specifications

The Husqvarna RZ46215,967009803 is a remarkable zero-turn mower designed for homeowners and landscape enthusiasts who seek efficiency and precision in lawn care. With its cutting-edge features and robust construction, this mower stands out in the market.

One of the primary highlights of the RZ46215 is its impressive engine power. Equipped with a reliable 21.5-horsepower engine, this machine ensures smooth and powerful operation, allowing you to tackle tough mowing jobs effortlessly. The strong performance is complemented by a dual hydrostatic transmission, offering unmatched maneuverability and control. This system allows users to turn in place, significantly reducing the time spent mowing and enhancing the overall mowing experience.

The RZ46215 boasts a 46-inch cutting deck that features a high-performance design, ensuring a clean and even cut across various grass types. With an adjustable cutting height ranging from 1.5 to 4 inches, homeowners can easily customize their mowing experience to meet specific lawn care needs. The deck is constructed from durable materials, ensuring longevity and resistance against wear and tear.

Comfort is a priority in the design of the RZ46215. The mower features an ergonomic seat with high back support, allowing operators to mow for extended periods without discomfort. Additionally, the intuitive controls are strategically placed for easy access, ensuring that users can adjust settings and steer with minimal effort.

Safety features are also paramount in the Husqvarna RZ46215. The mower includes a safety start mechanism that prevents accidental starting, ensuring peace of mind when operating the machine. Furthermore, the durable chassis is designed to handle rough terrain, providing stability and safety on uneven ground.

In terms of technology, the RZ46215 aligns with Husqvarna's commitment to innovation. The mower offers the option of an integrated cutting height adjustment system, which simplifies the process of changing heights without the need for tools. Moreover, the blade engagement is electric, providing instant engagement with the push of a button, enhancing efficiency.

In summary, the Husqvarna RZ46215,967009803 is engineered for those who demand reliability and performance in their outdoor equipment. Its powerful engine, efficient cutting deck, ergonomic design, and advanced safety features make it an excellent choice for anyone looking to maintain their lawn with ease and precision. With Husqvarna, you can be assured of quality and innovation in your mowing experience.