General Maintenance

SAFETY

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from the vehicle when filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in fuel system, engine must not be started until problem has been resolved.

•Check the fuel level before each use and leave space for the fuel to expand, as the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

WARNING! The engine and the exhaust system become very hot during operation.

There is risk for burns if touched.

Allow engine and exhaust system to cool before refueling.

•Never operate machine in a closed area.

•Keep all nuts and bolts tight to be sure the equipment is

in safe working condition.

• Maintain or replace safety and instruction labels, as necessary.

• Never tamper with safety

devices. Check their proper operation regularly.

•Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven with defective or unmounted protective plates, protective cowlings, safety switches, or other protective devices.

•Do not change the settings of governors and avoid running the engine with overly high engine speeds. If you run the engine too fast, you risk damaging the machine components.

•Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel- soaked debris. Allow machine to cool before storing.

•If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before restarting.

•Never make any adjustments or repairs with the engine running.

•Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary.

WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

•Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them.

•Check brake operation frequently. Adjust and service as required.

•Make sure that the equipment is in good condition and that all nuts and bolts, especially those fastening the blade attachments, are properly tightened and torqued.

•Ensure that the fuel filler cap is mounted tightly and no flammable substances are stored in an open vessel.

•Never work with the starter circuit if there is spilled fuel.

•Sparking can occur when

working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking will not occur after the

grounding cable (normally negative, black) is removed from the battery. Disconnect

the grounding cable from the battery first and reconnect it last.

•Do not make a bridge short circuit across the starter relay to run the starter.

•Be very careful when handling battery acid. Acid on skin can cause serious corrosive burns. If you spill battery acid on your skin, rinse immediately with water.

WARNING!

The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after handling the battery.

•Acid in the eyes can cause blindness, contact a doctor immediately.

•Be careful when servicing the battery. Explosive gases

form in the battery. Never perform maintenance on the battery when smoking or

near open flames or sparks.

• The battery can explode and cause serious injury or damage.

•Never use the machine

indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

•Stop to inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

•Never make adjustments with the engine running.

RZ46215 specifications

The Husqvarna RZ46215,967009803 is a remarkable zero-turn mower designed for homeowners and landscape enthusiasts who seek efficiency and precision in lawn care. With its cutting-edge features and robust construction, this mower stands out in the market.

One of the primary highlights of the RZ46215 is its impressive engine power. Equipped with a reliable 21.5-horsepower engine, this machine ensures smooth and powerful operation, allowing you to tackle tough mowing jobs effortlessly. The strong performance is complemented by a dual hydrostatic transmission, offering unmatched maneuverability and control. This system allows users to turn in place, significantly reducing the time spent mowing and enhancing the overall mowing experience.

The RZ46215 boasts a 46-inch cutting deck that features a high-performance design, ensuring a clean and even cut across various grass types. With an adjustable cutting height ranging from 1.5 to 4 inches, homeowners can easily customize their mowing experience to meet specific lawn care needs. The deck is constructed from durable materials, ensuring longevity and resistance against wear and tear.

Comfort is a priority in the design of the RZ46215. The mower features an ergonomic seat with high back support, allowing operators to mow for extended periods without discomfort. Additionally, the intuitive controls are strategically placed for easy access, ensuring that users can adjust settings and steer with minimal effort.

Safety features are also paramount in the Husqvarna RZ46215. The mower includes a safety start mechanism that prevents accidental starting, ensuring peace of mind when operating the machine. Furthermore, the durable chassis is designed to handle rough terrain, providing stability and safety on uneven ground.

In terms of technology, the RZ46215 aligns with Husqvarna's commitment to innovation. The mower offers the option of an integrated cutting height adjustment system, which simplifies the process of changing heights without the need for tools. Moreover, the blade engagement is electric, providing instant engagement with the push of a button, enhancing efficiency.

In summary, the Husqvarna RZ46215,967009803 is engineered for those who demand reliability and performance in their outdoor equipment. Its powerful engine, efficient cutting deck, ergonomic design, and advanced safety features make it an excellent choice for anyone looking to maintain their lawn with ease and precision. With Husqvarna, you can be assured of quality and innovation in your mowing experience.