Husqvarna 339XP manual Contents

Page 3

CONTENTS

Before using a new saw

Read the instructions carefully.

Check cutting equipment is correctly fitted and adjusted. See page 25.

Refuel and start the saw. Check the carburetor settings. See pages 26-29.

Do not use the saw until sufficient chain oil has reached the chain, see page 14.

IMPORTANT! If the carburetor mixture is too lean it greatly increases the risk of engine failure.

Poor maintenance of the air filter will cause carbon build-up on the spark plug and lead to difficult starting.

If the chain is badly adjusted it will cause increased wear or damage to the bar, drive sprocket and chain.

!WARNING!

Under no circumstances may the design of the machine be modified without the permis- sion of the manufacturer. Always use genuine spare parts/accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

!A chain saw is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand these instructions.

!Warning! The inside of muffler contain chemicals that may be carcenogenic. Avoid contact with these elements in the event of damaged muffler.

You will find the following labels on your chain saw:

Contents

Key to symbols

2

Safety instructions

 

Personal protective equipment

4

Chain saw safety equipment

4

Inspecting, maintaining and servicing chain saw

 

safety equipment

8

Cutting equipment

10

How to avoid kickback

16

General safety precautions

18

General working instructions

19

What is what?

 

What is what?

24

Assembly

 

Mounting guide bar and chain

25

Fuel handling

 

Fuelmix

26

Fuelling

27

Start and stop

 

Start and stop

28

Maintenance

 

Carburetor

29

Starter device

30

Air filter

31

Spark plug

31

Muffler

31

Adjustment of the oil pump

32

Cooling system

32

Daily maintenance

32

Weekly maintenance

33

Monthly maintenance

33

Technical Data

 

336

34

Emission Control Warranty Statement

Your warranty rights and obligations

35

IMPORTANT ENGINE INFORMATION

336 35cc

YHVXS. 0354RA

HUSQVARNA AB HUSKVARNA SWEDEN EM THIS ENGINE CONFORMS TO U.S. EPA PH 1 EMISSION REGULATION FOR SMALL NONROAD ENGINES. REFER TO OPERATOR´S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

English – 3

Image 3
Contents English 336Symbols KEY to SymbolsContents Safety Instructions Chain SAW Safety EquipmentPersonal Protective Equipment 3a Starting Chain brake and front hand guardThrottle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the brake trigger Checking brake band wearChecking the front hand guard Checking the inertia brake releaseThrottle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainSharpening your chain and adjusting raker clearance General information on sharpening cutting teethSharpening cutting teeth General advice on setting raker clearance Setting the raker clearanceTensioning the chain Lubricating cutting equipment Chain oilFilling with chain oil Chain drive sprocket Lubricating the bar tip sprocketWhat is kickback? HOW to Avoid KickbackDo not let go of the handles General rulesGeneral Safety Precautions Min m10 ft General Working Instructions Basic safety rulesCutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatCutting trees and branches that are in tension Preparations Freeing a tree that has fallen badly = high accident riskCutting the trunk into logs Freeing a Trapped treeWhat is WHAT? Mounting guide bar and chain AssemblyTwo-stroke oil Fuel HandlingFuelmix Gasoline10ft FuellingChain oil Min 3 mStart and Stop StartStop Carburetor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordMuffler Adjustment of the oil pumpAir filter Spark plugDaily maintenance Cooling systemLong-term storage Weekly maintenance Monthly maintenance 336 Technical DataYour Warranty Rights Obligations Emission Control Warranty Statement2003W07 114 01
Related manuals
Manual 57 pages 161 b