Husqvarna YTH1542XPT owner manual To Replace Mower Drive Belt See Fig, Mower Drive Belt Removal

Page 20

SERVICE AND ADJUSTMENTS

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 23)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

•If adjustment is necessary, see steps in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

02966

A A

FIG. 23

FRONT-TO-BACK ADJUSTMENT (See Figs. 24 and 25) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (tighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

02548

BB

FIG. 24

B

 

 

A

Tighten adjust nut

Loosen adjust nut

B to raise mower

B to lower mower

02950

 

Loosen jam nut A first

FIG. 25

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

TO REPLACE MOWER DRIVE BELT (See Fig. 26)

MOWER DRIVE BELT REMOVAL

•Park tractor on a level surface. Engage parking brake.

•Lower attachment lift lever to its lowest position.

•Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

•Remove belt from electric clutch pulley (M), both mandrel pulleys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

•Install belt around all mandrel pulleys (R) and around idler pulleys (S) as shown.

•Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

•Raise attachment lift lever to highest position.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents YTH1542XPT Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Reverse Operation System ROS on PositionHOW to USE Your Tractor StoppingTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Operate MowerService REMINDER/HOUR Meter Before Starting the EngineTo Operate on Hills To Transport See FigsADD Gasoline To Start Engine See FigPurge Transmission Automatic Transmission Warm UPMowing Tips Maintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBrake Operation TiresEngine Cleaning Engine OIL FilterMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs To Level Mower Mower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt See Fig To Replace Motion Drive Belt See Fig To Check BrakeFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Replace Headlight Bulb Interlocks and RelaysTo Remove Hood and Grill Assembly See Fig To Adjust Throttle Control CableTo Adjust Choke Control To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor Model NO. YTH1542XPT 96043000602, Product no 43Electrical KEY Part NO. NO. Description Chassis KEY Part Description Drive KEY Part NO. NO. Description Steering Assembly Spark Arrester KIT EngineSeat Assembly Tractor Model NO. YTH1542XPT 96043000602, Product no 43 00 Wheels and TiresMower Deck KEY Part NO. NO. Description Mower Lift Service Notes Suggested Guide for Sighting Slopes for Safe Operation Warranty Statement 532 40 64-54 10.04.06 CL

YTH1542XPT specifications

The Husqvarna YTH1542XPT is a versatile and powerful riding mower designed for homeowners who seek efficiency and superior performance while maintaining their lawn. This model is equipped with several innovative features and technologies that make lawn care easier and more enjoyable.

At the heart of the YTH1542XPT is a sturdy 15 horsepower Briggs & Stratton engine that delivers reliable starting and performance. The engine is paired with a hydrostatic transmission, allowing for smooth and precise speed adjustments without the need for manual gear shifting. This feature provides an easy driving experience, making it ideal for navigating around obstacles and tight spaces in your yard.

The YTH1542XPT boasts a robust 42-inch cutting deck, which is ideal for efficiently covering ground while still providing a clean and even cut. The cutting deck is designed with three different cutting heights, easily adjustable from the operator's seat, enabling users to achieve their desired grass height quickly. The air induction mowing technology also enhances grass lift, ensuring that clippings are cut evenly before being discharged – either side-discharged or mulched using an optional kit.

Furthermore, the Husqvarna YTH1542XPT features an ergonomic seat and steering wheel, ensuring comfort during extended mowing sessions. The easy-access controls allow users to engage the blades, adjust the deck height, and control speed effortlessly, all of which contribute to an enjoyable mowing experience.

In terms of build quality, the robust steel frame provides durability and stability, ensuring the lawn tractor can withstand tough terrains and conditions. The large rear wheels offer excellent traction and maneuverability on varying surfaces, while the front wheels provide an unobstructed view that makes it easier to navigate tight corners.

The YTH1542XPT also stands out with its cutting-edge technology. The compact and efficient design not only conserves space in your garage but also optimizes fuel efficiency, allowing users to mow larger areas with fewer refueling interruptions.

In summary, the Husqvarna YTH1542XPT is a reliable riding mower packed with features designed for efficiency, comfort, and ease of use. Whether tackling a small yard or a larger property, its powerful engine, adjustable cutting deck, and ergonomic controls make it an excellent choice for homeowners who value quality and performance in their lawn care tools.
Top Page Image Contents