Adjustments, Throttle Lever Tension | Husqvarna ZTHKW4818A specification

ADJUSTMENTS

FRONT DECK BELT ROUTING: (See Fig. 4)

Figure 4

THROTTLE LEVER TENSION:

1.Stop engine and remove key.

2.If throttle lever becomes loose, tension may be adjusted by tightening the pivot bolt. The pivot bolt holds the throttle arm to the throttle mounting bracket which is located under the console. Access is gained by removing the foot plate and the kick plate. See page 3.

REVERSE SPRING DETENT ADJUSTMENT:

1.Stop engine and remove key.

2.Pull the motion control lever back to the reverse position and release the lever. When the lever stops it should be in line with the neutral slot, so you can rotate the lever out with out hitting the side of the console.

3.If adjustment is needed put the seat in the rear slide position, tilt seat forward, remove seat lanyard from seat frame, and rotate seat forward to rest on the frame.

4.On the back of the console where the spring is fastened. Loosen 3/8” nut and bolt enough to allow the bolt to slide in the slot.(See Fig. 5a)

5.Rotate the motion control lever out into the neutral slot. While the lever is swung out pull it against the back edge of the neutral slot. Holding the lever adjust the spring by sliding the bolt in the slot to remove all the slop and retighten the 3/8” nut and bolt.(Repeat steps on other side if needed.)(See Fig. 5a)

6.Check your adjustment by repeating step two.

7.If no more adjustment is needed refasten the seat lanyard to the seat frame.

ZTHKH4818A, ZTHKH4820A, ZTHKW4818A, ZTHKW4821A, ZTHQL4218A, ZTHQL4221A, ZTHQL4221A, ZTHKH4820A, ZTHKH4818A, ZTHKW4818A specifications

Husqvarna stands out in the lawn care industry with its exceptional range of zero-turn mowers, aimed at providing efficiency and precision for both residential and commercial landscaping needs. The models including the ZTHKW4821A, ZTHKH4820A, ZTHKW4818A, ZTHKH4818A, ZTHKH4820A, ZTHKW4818A, ZTHKW4821A, ZTHQL4218A, ZTHQL4221A, and ZTHQL4221A boast a variety of advanced features that enhance their performance and ease of use.

One of the most notable characteristics of these zero-turn mowers is their powerful engines. Designed with robust motors, these mowers deliver superior torque and speed, ensuring that users can tackle large lawns with ease. The ZTHKW4821A, for example, is equipped with a high-performance engine that enables fast mowing speeds, significantly reducing lawn care time.

The innovative cutting technology employed across this line of mowers ensures a clean, precise cut every time. The cutting decks are engineered to handle various grass types and conditions, allowing for optimal performance throughout the mowing season. Features like adjustable cutting heights offer users the flexibility to maintain their lawns to their preference.

These models are also designed with user comfort in mind. The ergonomic seating and intuitive control systems provide a comfortable and pleasant mowing experience. Models like the ZTHKH4820A feature a side-by-side seating arrangement that allows for easy access to controls without compromising comfort.

Built to last, Husqvarna's zero-turn mowers are constructed with durable materials that withstand the rigors of outdoor use. The rust-resistant decks and reinforced frames ensure longevity and reliability, making them a smart investment for homeowners and professionals alike.

Additionally, these mowers are equipped with enhanced maneuverability, allowing users to navigate tight corners and obstacles with ease. The zero-turn capability significantly improves efficiency, making lawn maintenance quicker and more effective.

With advanced features and intuitive design, Husqvarna’s ZTHKW4821A, ZTHKH4820A, ZTHKW4818A, ZTHKH4818A, ZTHKH4820A, ZTHKW4818A, ZTHKW4821A, ZTHQL4218A, ZTHQL4221A, and ZTHQL4221A offer performance, comfort, and durability suitable for every lawn care enthusiast. Whether for residential gardens or large commercial properties, Husqvarna's zero-turn mowers are engineered to meet diverse mowing needs, ensuring that every lawn looks its best.