Husqvarna LTH1742TWIN manual To Level Mower

Page 21

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 19B)

With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

FIG. 19B

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 19C)

With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Raise mower to its highest position.

At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

FIG. 19C

If adjustment is necessary, see step in Visual Adjust- ment instructions above.

Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 19D and 19E) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

Raise mower to highest position.

Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

02548

BB

FIG. 19D

If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

Tighten adjust nut

Loosen adjust

B to raise mower

nut B to lower

02950

mower

 

Loosen jam nut A first

FIG. 19E

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

21

Image 21
Contents LTH1742TWIN Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Steering Wheel Unassembled PartsTools Required for Assembly AssemblyTo Remove Tractor from Carton Before Removing Tractor from SkidInstall Seat See Figs a and 2b Check Battery See aAttach Hood Scoop See b Check Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor To Move Forward and Backward HOW to USE Your TractorUsing the Reverse Operation System To Adjust Mower Cutting Height See FigTo Operate Mower See Fig Reverse Operation System ROS See FigTo Transport See Figs Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Purge TransmissionAutomatic Transmission Warm UP Lubrication Chart MaintenanceService Dates General RecommendationsBlade Care TractorBlade Removal see a To Sharpen Blade See BEngine Cleaning Service and Adjustments To Install Mower See FigTo Remove Mower See Fig On rear mower bracket and secure with washer Retainer spring To Level Mower To Replace Mower Blade Drive Belt See Fig Belt InstallationTo Replace Motion Drive BELTSee FIG To Check BrakeTo Adjust Steering Wheel Alignment Transmission REMOVAL/REPLACEMENTTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTo Adjust Choke Control To Adjust Throttle Control CableTo Adjust Carburetor To Replace Headlight BulbOther StorageFuel System Engine OILTroubleshooting Points With attachment clutch Service Notes Service Notes Service Notes Only Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation532 41 73-88 11.02.07 AP

LTH1742TWIN specifications

The Husqvarna LTH1742TWIN is a standout in the realm of garden tractors, designed to deliver exceptional performance for home gardeners and those with larger yards. This versatile machine offers a perfect combination of power, efficiency, and ease of use, making it an ideal choice for a variety of mowing tasks.

At the heart of the LTH1742TWIN is its robust 17-horsepower Briggs & Stratton twin-cylinder engine, which provides ample power for tackling even the thickest grass. The engine is both reliable and efficient, ensuring that users can complete their mowing tasks with minimal downtime. Additionally, the hydrostatic transmission enhances the driving experience, offering smooth and effortless speed adjustments with the simple push of a pedal. This feature allows users to easily navigate around obstacles without the need for frequent gear changes.

One of the standout features of the LTH1742TWIN is its 42-inch cutting deck, designed with a clear-cutting edge to ensure a tidy and professional-looking finish. The deck is equipped with two blades that effectively slice through grass and other vegetation, providing a superior cut that promotes a healthier lawn. Furthermore, the deck can be easily adjusted to cut at different heights, allowing users to customize their mowing heights based on their preferences and the condition of their lawn.

In terms of design, the Husqvarna LTH1742TWIN includes an ergonomic steering wheel and comfortable seat, ensuring that operators can mow for extended periods without discomfort. The cutting deck has a washout port, making it easy to clean after use and maintain the mower in optimal condition. Additionally, the rugged chassis and durable construction are built to endure the rigors of regular use in various lawn care environments.

Technologically, the Husqvarna LTH1742TWIN features an intuitive control panel that provides quick access to essential functions, including blade engagement and throttle control. This thoughtful design enhances user control and ensures a more efficient mowing experience. The option for mulch, bag, or side-discharge options further adds to its versatility, allowing users to choose how they want to handle grass clippings.

In summary, the Husqvarna LTH1742TWIN is a powerful and user-friendly garden tractor designed to meet the needs of homeowners. With its effective twin-cylinder engine, versatile cutting deck, and ergonomic design, this lawn mower is not just an investment; it is a valuable partner in maintaining a beautiful and healthy lawn.