Husqvarna 2003-06 manual Security Sounds User info level

Page 38

MENU FUNCTIONS

Language (4-4)

Using this function you can change the language selection you made when the Auto Mower was first started.

To select the language: Move the cursor to ”Language” and press YES. Now Move the cursor to the required language and press YES.

Security

Sounds

User info level

Language

Time and date

4-4

Time and date (4-5)

Using this function you can change the time and date on the Auto Mower.

You can also change the format selections you made when the Auto Mower was first started via this function.

Set time, 4-5-1

Move the cursor to ”Set time” and press YES. Now state the correct time and finish with YES.

Set date, 4-5-2

Move the cursor to ”Set date” and press YES. Now state the correct date and finish with YES.

Time format, 4-5-3

Move the cursor to ”Time format” and press YES. Move the cursor to the required time format:

12h or

24h.

Finish by pressing YES.

Date format, 4-5-4

Move the cursor to ”Date format” and press YES. Move the cursor to the required date format:

YY-MM-DD (year-month-day),

MM-DD-YY (month-day-year) or

DD-MM-YY (day-month-year).

Finish by pressing YES.

Security

Sounds

User info level

Language

Time and date

4-5

Set time

Set date

Time format

Date format

4-5-

English-39

Image 38
Contents Auto Mower Auto Mower Helpdesk Congratulations IntroductionIntroduction Symbols on the Auto Mower SymbolsSymbols Symbols in the Operator’s Manual Xxxxxx xxx xxxx xxxxxxx xxx xxxx xxxx xxxxxUse Safety InstructionsSafety Instructions Maintenance TransportPresentation PresentationFunction Auto Mower Working methodEnglish-11 Capacity Movement patternPreparations InstallationInstallation Auto Mower, what is what? Numbers in the picture corresponds toLength of the low voltage cable must not be changed Planning the installationCharging station English-16 English-17 Boundary wire 10 cm Minimise Placing the charging station Charging the battery Laying out the boundary wireConnecting the boundary wire English-24 Checking the installation Linking the Auto Mower to the charging stationControl Panel Control panelShortcuts ProgramNumbers Main switchSelect Main menu Menu FunctionsMenu functions Commands TimerTimer override Drive past wire InstallationCharge exit settings Garden shapeDrive past wire Garden shape Check loop Charge exit settings Settings PIN code Sounds Significance Starting Charging Security Sounds User info level Use Charging a discharged batteryUSE Starting the Auto MowerRestart Using the timerStopping the Auto Mower Turn off Auto MowerAdjusting the cutting height Battery MaintenanceMaintenance Winter StorageBody CleaningUnderframe and blade disc Replacing the blade units Fault messages Trouble ShootingTrouble shooting Empty battery Fault message Cause Action OutsideLow battery voltage Wrong PIN codeTrouble Shooting Guide Technical Data Technical DataEU Declaration of Conformity only applies to Europe EU Declaration of ConformityEU declaration of conformity 114 01 2003W23