Charge exit settings

MENU FUNCTIONS

Drive past wire (3-2)

The front of the Auto Mower always passes the bound- ary wire by a speciﬁc distance before the mower turns. The default distance is 27 cm, but this can be changed if required.

•To adjust the distance: Move the cursor to ”Drive past wire” and press YES. Now state the number of centimetres you want the Auto Mower to pass the boundary wire.

Garden shape (3-3)

The Auto Mower can be set according to three garden shapes: open, complex 1 and complex 2. See exam- ples of garden shapes on page 16. Many gardens can be characterised as open, which is also the default set- ting on the Auto Mower.

•Open (3-3-1)

Select ”Open” if your garden has an open lawn, few obstacles and no passages.

•Complex 1 (3-3-2)

Select ”Complex 1” if your garden has an average number of obstacles and/or passages.

•Complex 2 (3-3-3)

Select ”Complex 2” if you garden has a large lawn and many obstacles and/or passages.

Drive past wire

Garden shape

Check loop

3-2

Charge exit settings

Drive past wire

Garden shape

Check loop

3-3

_ _

Open

Complex 1

Complex 2 3-3-

Check loop (3-4)

This function allows you to check the mower’s signal reception from the boundary wire, and to determine exactly where in the lawn the boundary wire is routed.

The sensor used for this function sits concealed directly under the catch button for the cutting height adjustment cover. The sensor detects the position of the Auto Mower in relation to the loop. ”Inside”, ”Out- side” or ”No loop signal” are shown on the display. If the mower is inside the loop, ”Inside” is shown, etc. If the mower is set with sound on, a constant beep is also heard when the mower is outside and a pulsating beep when it cannot detect a signal. If the mower is inside the loop no beep is heard.

To:

•Check the signal reception: Move the cursor to ”Check loop” and press YES.

•Find wire: Move the Auto Mower over the outer edge of the working area and select ”Check loop”. Repeat until you ﬁnd the boundary between ”Inside” and ”Outside”. You now know where the wire is.

Charge exit settings

Drive past wire

Garden shape

Check loop

3-4

English-34