Husqvarna LGTH2454 owner manual Attach Mower Side Suspension Arms a to Chassis See Fig

Page 8

ASSEMBLY

ANTI-SWAY BAR

TRANSAXLE

(S) LOCATION

BRACKET (T)

LOCATED

BETWEEN REAR

TIRES

 

S

T

S. ANTI-SWAY BAR

 

T. TRANSAXLE BRACKET

Fig. 10

NOTE: Depending on model, bracket (T) may be differ- ent than shown but hole for anti-sway bar will be in same position/location.

Pivot the integrated washer end of anti-sway bar (S) towards mower deck bracket on right side of mower. Insert integrated washer end of bar into hole in rear mower bracket (D). Move mower as needed to insert integrated washer end of bar into rear mower bracket (D).

Secure with small washer and small retainer spring as shown.

 

 

D. RIGHT SIDE

 

 

 

REAR MOWER

 

T

S

BRACKET

 

S. ANTI-SWAY BAR

 

 

D

 

T.

TRANSAXLE

 

 

BRACKET

 

 

 

Fig. 11

6.ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS (See Fig. 12)

Position front hole in side suspension arm (A) over pin on outside of tractor chassis and secure with large washer and large retainer spring (B).

Repeat on opposite side of tractor.

 

 

 

A.MOWER SIDE

 

 

 

SUSPENSION

 

 

 

ARMS

 

 

 

B. RETAINER

 

 

 

SPRING

 

 

 

D. RIGHT

 

 

 

SIDE REAR

D

A

B

MOWER

BRACKET

 

 

 

Fig. 12

7. ATTACH REAR LIFT LINKS (C) (See Fig. 13)

Insert rod end of rear lift link (C) into hole (U) in tractor lift shaft suspension arm and pivot link down to mower.

Lift rear corner of mower and position slot in link as- sembly over pin on rear mower bracket (D) and secure with large washer and large retainer spring.

Repeat on opposite side of tractor.

U

C

 

C. REAR LIFT LINK(S)

 

D. RIGHT SIDE REAR

D

MOWER BRACKET

U. HOLE

 

Fig. 13

8 ATTACH FRONT LINK (E) (See Fig. 14)

Turn steering wheel to position wheels straight forward.

From front of tractor, insert rod end of front link (E) through front hole in tractor front suspension bracket (F).

Move to left side of mower and and insert large retainer spring (G) through hole in front link (E) behind front suspension bracket (F).

Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and small retainer spring (J).

NOTE: Requires deck lifting.

FRONT LINK

LOCATION

M

H

F

G E

J

E.FRONT LIFT LINK ASSEMBLY

F.FRONT SUSPENSION BRACKET

G.LARGE RETAINER SPRING

H.FRONT MOWER BRACKET

J.SMALL RETAINER SPRING M. ENGINE CLUTCH PULLEY

Fig. 14

8

Image 8
Contents LGTH2454 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationIV. Towing ServiceIII. Children Table of Contents Assembly Tools Required for AssemblyUnassembled Parts ToremovetractorfromcartonTo Check Battery See Fig Adjust Seat See FigTo Install Mower and Drive Belt See Figs Before Removing Tractor from SkidInstall ANTI-SWAY BAR S if Equipped See Assemble Front Gauge Wheel W to Front of Mower See FigTurn Steering Wheel Left and Position Mower See Fig Slide Mower Under Tractor See FigAttach Front Link E See Fig Attach Mower Side Suspension Arms a to Chassis See FigAttach Rear Lift Links C See Fig Install Belt on Engine Clutch Pulley M See Check Tire PressureCheck Deck Levelness Check for Proper Position of BeltsOperation Know Your Tractor DPH AC JHOW to USE Your Tractor To SET Parking Brake See FigTo USE Throttle Control D See Fig Stopping See FigTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigTo Move Forward and Backward See Fig To Operate MowerService REMINDER/HOUR Meter Reverse Operation System ROSTo Operate on Hills To Transport See FigsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Purge TransmissionMaintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBlade Care Blade Removal See FigClean AIR Screen BeltsTransaxle Cooling Transaxle Pump FluidDeck Washout Port See Fig CleaningIN-LINE Fuel Filter See Fig Service and Adjustments To Install MowerTo Remove Mower See Fig To Replace Mower Blade Drive Belt See FigTo Level Mower Transaxle Motion Control Lever Neutral Adjustment See Fig Belt InstallationTo Replace Motion Drive Belt See Fig To Check BrakeTo Start Engine with a Weak Battery See Fig Replacing Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission EngineStorage OtherFuel System Engine OILLoss of power Will not startHard to start Engine will notTo run when oper Battery will notFires when turn Engine continuesSchematic Tractor Model NO. LGTH2454 96043010700, Product no 43Tractor Model NO. LGTH2454 96043010700, Product no 43 Electrical KEY Part DescriptionChassis Tractor Model NO. LGTH2454 96043010700, Product no 43 Drive Bolt Rdhd Sqnk 3/8-16 x 2-3/4 Gr Engine Engine Kawa Model No. FR691V-AS06 Steering Assembly Seat Assembly 532 42 SeatMower Deck 532 40 31-25 Deck Weldment Mower Mower Lift Decals Wheels and TiresLimitations and Exclusions HOW to Obtain Service Consumer Wheeled Warranty Chart Front Mounted Deck Riders Engine Transmission Suggested Guide for Sighting Slopes for Safe Operation Service Notes Service Notes Service Notes 05.24.10 JA

LGTH2454 specifications

The Husqvarna LGTH2454 is a versatile and powerful lawn tractor designed to provide excellent cutting performance and user comfort. With its robust construction and advanced features, it is ideal for homeowners with medium to large-sized yards. The LGTH2454 stands out for its powerful engine, user-friendly operation, and enhanced mowing capabilities, making it a reliable choice for lawn care enthusiasts.

At the heart of the LGTH2454 is its 24 HP Kohler engine, known for its durability and efficient performance. This powerful engine delivers consistent power to the cutting deck, ensuring a clean and even cut every time. The automatic transmission allows for smooth speed adjustments, providing an effortless driving experience whether you’re mowing on flat terrain or tackling slight inclines.

One of the standout features of the LGTH2454 is its 54-inch cutting deck. The wide cutting path not only helps to reduce mowing time but also allows for efficient coverage of large areas. The cutting height can be easily adjusted from 1.5 to 4 inches, providing flexibility for different grass types and mowing conditions. The reinforced cutting deck design ensures durability, while the air-induction technology enhances airflow within the deck for superior grass lift and cutting performance.

Comfort is a key focus in the design of the LGTH2454. The high-back seat is ergonomically designed to provide support during extended mowing sessions. Coupled with an adjustable steering wheel, it allows operators to customize their seating position for optimal comfort. The easy access controls streamline operation, ensuring that users can focus on mowing without fumbling with complicated settings.

The LGTH2454 also features an innovative cutting system that enables mulching, bagging, or side discharge, making it adaptable to various lawn care needs. The mulching kit recycles clippings back into the lawn, promoting healthier grass growth, while the bagging option collects grass for easy disposal.

Additional technologies such as the LED headlights enhance visibility during early morning or late afternoon mowing, enabling users to work in various lighting conditions. The rugged tires provide excellent traction, ensuring stability on uneven ground.

In conclusion, the Husqvarna LGTH2454 is a top-tier lawn tractor that combines power, versatility, and comfort. Its robust engine, wide cutting deck, and user-centric design make it an appealing choice for anyone looking to maintain a beautiful lawn with ease and efficiency. Whether you’re a seasoned gardener or a novice homeowner, the LGTH2454 is equipped to meet your lawn care needs.