02965
A
NOTE: Be sure mower side suspension arms (A) are pointing forward before slid- ing mower under tractor.
3.Slide mower under tractor until it is centered under tractor.
4.ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.
5.Repeat on opposite side of tractor.
A
B
C
D
8.Turn steering wheel to position wheels straight forward.
9.ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link assembly through front hole in trac- tor front suspension bracket (F) and secure with large 7/16 retainer spring
(G) through hole in link located behind the bracket.
10.Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and small 5/16 retainer spring (J).
5/16
E H J
F
G
7/16
11.Disengage belt tension rod (K) from locking bracket (L).
12.Install belt onto engine clutch pulley (M). IMPORTANT: Check belt for proper rout- ing in all mower pulley grooves.
6.ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.
7.Repeat on opposite side of tractor.
M
21