Husqvarna EZ6124 / 966038401, EZC4824 / 966038501, EZ4824 / 965880401 manual Training, Steering

Page 24

operation

Read “Safety Instructions” section and following pages, if you are unfamiliar with the machine.

Training

Zero turn mowers are far more maneuverable than typical riding mowers due to their unique steering capabilities.

We suggest that this section be reviewed in its entirety prior to attempting to move the mower under its own power. Additionally, we suggest when first operating the mower, use a reduced throttle speed and reduced ground speed by NOT moving control levers to the furthest forward or reverse positions during initial operation, or until operator becomes comfortable with controls. We also suggest first time users, or new users to Zero Turn mowers to become familiar with the mower’s movement on a hard surface, such as concrete or blacktop PRIOR to attempting to operate on turf. Until operator becomes comfortable with mower controls and zero turning capability, they may damage turf due to overly aggressive maneuvers.

IMPORTANT INFORMATION

When control levers are in the reverse position they return to neutral when released. This may cause the mower to suddenly stop.

Steering

To move forward and backward

The direction and speed of the mower’s movements is effected by the movement of the control lever(s) on each side of mower. The left control lever controls the left wheel. The right control lever controls the right wheel.

First time users should push mower (see “Moving by Hand” in the Operation section) to an open, flat area, without other people or vehicles/obstacles nearby. In order to move unit under its own power, the operator must be in the seat, start engine (see “Before Starting” in Operation section), adjust engine speed to idle, disengage parking brake, do not engage blades at this time, rotate control levers inward. As long as

the control levers have not been moved forward or backwards, mower will not move. Slowly move both control levers forward slightly. This will allow mower to start moving forward in a straight line. Pull back on control levers to the neutral position and mower should stop moving. Pull back slightly on control levers, this will allow mower to start moving backwards. Push forward on control levers to the neutral position and mower should stop moving.

To turn to the right

While moving in a forward direction, pull the right lever back towards the neutral position while maintaining the position of the left lever, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn to the left

While moving in a forward direction pull the left lever back towards the neutral position while maintaining the position of the right lever, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn

While moving in a forward direction, first pull both control levers back until the mower stops or slows dramatically.

Then by alternating one lever slightly to the forward position and the other in the reverse position.

24-Husqvarna

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operator Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and decals Moving sharp blades under cover Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Controls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveAlways raise the deck to the highest position for transport Seat Adjustment Lever Hour MeterTracking Knob Training SteeringBefore Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Weak Battery Jumper CablesTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Manual Transport ZT-2800 Bypass LinkagesMaintenance Maintenance ScheduleHusqvarna-35 Battery Replacing batterySafety System Ignition SystemEngine Cooling Air Intake Throttle CableChoke Cable Air Filter Briggs & Stratton EngineServicing Precleaner Kohler EngineServicing Paper Element Maintenance Tire Pressures Belts Belt installation Pump Belt Replacing pump beltBelt removal Blade replacement Cutting BladesAdjusting the Mower Deck Leveling deckAnti-scalp rollers Cleaning Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication GeneralLubrication Front Wheel MountFront Wheel Bearings Deck SpindleEngine Oil Changing the Engine Oil Transaxle Transmission Fluid Change Purging Procedures Troubleshooting Troubleshooting Service StorageWinter Storage Schematics Technical Data AccessoriesTorque Specifications Standard HardwareEZ4824 Engine TransmissionDimension EZ4824 FrameTechnical Data Cutting Width 52 / 132cm 48 / 122cm Cutting Height EZ6124 Engine EZ6124 USA requirements CE requirementsWarranty Limited WarrantyService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Change engine oilHour Service Perform the 25-hour service Service Journal Husqvarna-73 At Least Once Each Year Husqvarna-75 Page Page 115 145427 IR 01/17/09
Related manuals
Manual 80 pages 4.7 Kb

EZ4824 / 965880401, EZC4824 / 966038501, EZ6124 / 966038401 specifications

Husqvarna is a renowned brand in the garden and outdoor power equipment industry, providing innovative solutions for professionals and homeowners alike. The Husqvarna EZ6124 / 966038401, EZC4824 / 966038501, and EZ4824 / 965880401 are standout models within their zero-turn lawn mower range, designed to deliver exceptional performance, user comfort, and durability.

The EZ6124 is equipped with a powerful 24 HP engine that ensures robust performance across various terrains. Its 60-inch cutting deck facilitates efficient mowing, making quick work of large areas while maintaining a pristine cut. This model also features an advanced, easy-to-use height adjustment system, allowing users to set the cutting height with precision, ensuring that grass is maintained at the desired length.

For those seeking a more compact option, the EZC4824 is ideal. This model boasts a 24 HP engine and a 48-inch cutting deck, making it perfect for medium-sized lawns. Its compact design allows for enhanced maneuverability, particularly in tighter spaces. The EZC4824 is also equipped with a comfortable seat and ergonomic controls, ensuring that users can operate it with minimal fatigue during extended mowing sessions.

The EZ4824 is another excellent choice, featuring a similar 24 HP engine paired with a 48-inch cutting deck. This mower stands out for its exceptional agility and speed. Its zero-turn technology enables operators to navigate around obstacles effortlessly, providing a professional-quality finish in less time. With a durable construction, this model is built to withstand the rigors of regular lawn care.

All three models are designed with user-friendly features, including intuitive control systems and easy maintenance options. The cutting decks employ a robust design with reinforced spindles, ensuring longevity and reliability. Additionally, their safety features, including emergency brake systems and rollover protection, enhance operator security.

In conclusion, the Husqvarna EZ6124, EZC4824, and EZ4824 mowers offer a combination of power, efficiency, and comfort. With their innovative technologies and robust design, these zero-turn mowers are perfect choices for homeowners and landscaping professionals looking for high performance and reliability in their lawn care equipment. Whether tackling large open spaces or navigating intricate landscapes, these mowers provide exceptional value and results.
Top Page Image Contents