Husqvarna EZ6124 / 966038401, EZC4824 / 966038501, EZ4824 / 965880401 Battery, Replacing battery

Page 36

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times

WARNING!

Always wear eye protection when around batteries.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Move terminal covers.

2.Disconnect BLACK battery cable first, then the

RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Using two ½” wrenches disconnect BLACK battery cable then RED battery cable.

3.Position deck to lowest setting.

4.Front underside of frame, remove the nuts that secure the battery hold-down.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold-down and secure with nuts removed in Step 4.

8.Reconnect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and nut

10.Replace terminal boot cover.

11.Lower seat

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

8050-109

Remove battery hold-down to replace battery

36-Husqvarna

Image 36
Contents Operator Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and decals Moving sharp blades under cover Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Controls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveAlways raise the deck to the highest position for transport Seat Adjustment Lever Hour MeterTracking Knob Training SteeringBefore Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Weak Battery Jumper CablesTo remove cables, reverse order Running Operating On Hills Mowing Tips Stopping the Engine Manual Transport ZT-2800 Bypass LinkagesMaintenance Maintenance ScheduleHusqvarna-35 Battery Replacing batterySafety System Ignition SystemEngine Cooling Air Intake Throttle CableChoke Cable Air Filter Briggs & Stratton EngineServicing Precleaner Kohler EngineServicing Paper Element Maintenance Tire Pressures Belts Belt installation Pump Belt Replacing pump beltBelt removal Blade replacement Cutting BladesAdjusting the Mower Deck Leveling deckAnti-scalp rollers Cleaning Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication GeneralLubrication Front Wheel MountFront Wheel Bearings Deck SpindleEngine Oil Changing the Engine Oil Transaxle Transmission Fluid Change Purging Procedures Troubleshooting Troubleshooting Service StorageWinter Storage Schematics Technical Data AccessoriesTorque Specifications Standard HardwareEZ4824 Engine TransmissionDimension EZ4824 FrameTechnical Data Cutting Width 52 / 132cm 48 / 122cm Cutting Height EZ6124 Engine EZ6124 USA requirements CE requirementsWarranty Limited WarrantyService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 5-8 Hours Change engine oilHour Service Perform the 25-hour service Service Journal Husqvarna-73 At Least Once Each Year Husqvarna-75 Page Page 115 145427 IR 01/17/09
Related manuals
Manual 80 pages 4.7 Kb

EZ4824 / 965880401, EZC4824 / 966038501, EZ6124 / 966038401 specifications

Husqvarna is a renowned brand in the garden and outdoor power equipment industry, providing innovative solutions for professionals and homeowners alike. The Husqvarna EZ6124 / 966038401, EZC4824 / 966038501, and EZ4824 / 965880401 are standout models within their zero-turn lawn mower range, designed to deliver exceptional performance, user comfort, and durability.

The EZ6124 is equipped with a powerful 24 HP engine that ensures robust performance across various terrains. Its 60-inch cutting deck facilitates efficient mowing, making quick work of large areas while maintaining a pristine cut. This model also features an advanced, easy-to-use height adjustment system, allowing users to set the cutting height with precision, ensuring that grass is maintained at the desired length.

For those seeking a more compact option, the EZC4824 is ideal. This model boasts a 24 HP engine and a 48-inch cutting deck, making it perfect for medium-sized lawns. Its compact design allows for enhanced maneuverability, particularly in tighter spaces. The EZC4824 is also equipped with a comfortable seat and ergonomic controls, ensuring that users can operate it with minimal fatigue during extended mowing sessions.

The EZ4824 is another excellent choice, featuring a similar 24 HP engine paired with a 48-inch cutting deck. This mower stands out for its exceptional agility and speed. Its zero-turn technology enables operators to navigate around obstacles effortlessly, providing a professional-quality finish in less time. With a durable construction, this model is built to withstand the rigors of regular lawn care.

All three models are designed with user-friendly features, including intuitive control systems and easy maintenance options. The cutting decks employ a robust design with reinforced spindles, ensuring longevity and reliability. Additionally, their safety features, including emergency brake systems and rollover protection, enhance operator security.

In conclusion, the Husqvarna EZ6124, EZC4824, and EZ4824 mowers offer a combination of power, efficiency, and comfort. With their innovative technologies and robust design, these zero-turn mowers are perfect choices for homeowners and landscaping professionals looking for high performance and reliability in their lawn care equipment. Whether tackling large open spaces or navigating intricate landscapes, these mowers provide exceptional value and results.