Husqvarna GTH2648 To Adjust Mower Cutting Height See Fig, To Adjust Gauge Wheels See Fig

Page 10

OPERATION

J

FIG. 7

•Start tractor with motion control lever in neutral (N) position.

•Release parking brake.

•Slowly move motion control lever to desired position.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

A

FIG. 8

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

FIG.9

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield (S) in place.

S

FIG. 10

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GTH2648 General Operation Safety RulesSafe Operation Practices for Ride-On Mowers II. Slope OperationIII. Children ServiceGeneral Service IV. TowingTable of Contents To Remove Tractor from Carton AssemblyUnassembled Parts Unpack CartonCheck for Proper Position of ALL Belts Check Tire PressureCheck Deck Levelness Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor StoppingTo Operate Mower To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig Reverse Operation System ROSTo Operate on Hills Service REMINDER/HOUR MeterBefore Starting the Engine To Transport See FigsPurge Transmission ADD GasolineTo Start Engine See Fig Automatic Transmission Warm UPMowing Tips General Recommendations MaintenanceMaintenance ScheduleBlade Care BatteryTractor Brake OperationEngine Spark Plugs CleaningMuffler IN-LINE Fuel Filter See FigTo Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig To Level Mower Turn nut right Turn nut left To raise mower To Replace Motion Drive Belt See Fig Mower Drive Belt InstallationTo Replace Mower Blade Drive Belt See Fig Mower Drive Belt RemovalFront Wheel TOE-IN/CAMBER To Start Engine with a Weak Battery See FigBelt Installation To Remove Wheel for Repairs See FigTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor Model NO. GTH2648 96043003000, Product no 43Electrical KEY Part NO. NO. Description Chassis KEY Part Description Drive Transaxle, Hydro Engine Engine Power Rating Information Seat Assembly Decals Wheels and TiresMower Deck Tractor Model NO. GTH2648 96043003000, Product no 43 Mower Lift Steering Assembly Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement 532 40 83-75 12.1.06 CL

GTH2648 specifications

The Husqvarna GTH2648 is a robust and reliable garden tractor that offers exceptional performance for homeowners looking to maintain their lawns and gardens with ease. This machine is designed to provide a smooth and comfortable mowing experience, making it a popular choice among enthusiasts and professionals alike.

One of the standout features of the GTH2648 is its powerful engine. Driven by a 24-horsepower Briggs & Stratton engine, this tractor delivers the reliability and performance needed for tackling various mowing tasks. The engine is designed for easy starting and low maintenance, offering a dependable performance season after season.

The GTH2648 is equipped with a 48-inch cutting deck, which allows for efficient mowing of large and medium-sized lawns. The deck features a triple blade system that ensures an even cut for improved lawn health. Additionally, the cutting height can be easily adjusted with the help of a simple lever, providing users with the flexibility to choose the perfect length for their grass.

Another key aspect of the Husqvarna GTH2648 is its user-friendly controls. The ergonomically designed steering wheel and comfortable seat offer a pleasant driving experience, while the pedal-operated hydrostatic transmission allows for seamless forward and reverse movement. This feature makes it easy to maneuver around obstacles and navigate tight spaces, enhancing the overall efficiency of the mowing process.

The GTH2648 also boasts advanced safety features. Its automatic blade engagement system allows the blades to be engaged and disengaged with ease, minimizing the risk of accidents. Moreover, the tractor's robust construction ensures stability and durability, allowing users to tackle various terrains without fear of damaging the machine.

For added convenience, the Husqvarna GTH2648 comes with optional attachments, such as a bagging system and a mulching kit. These accessories enable users to customize their mowing experience further and provide additional functionality throughout the year, such as leaf collection and lawn fertilization.

In summary, the Husqvarna GTH2648 is an all-around garden tractor that combines power, efficiency, and user-friendly features. With its durable construction and innovative technologies, this tractor is an excellent investment for anyone looking to enhance their lawn care routine. Whether you are mowing, bagging, or mulching, the GTH2648 delivers performance and reliability to meet all your gardening needs.
Top Page Image Contents