Husqvarna EZ4824K / 965880301 manual Kohler Engine, Servicing Precleaner, Servicing Paper Element

Page 40

maintenance

Kohler Engine

These engines are equipped with a replaceable, high density paper air cleaner element. Some engines are also equipped with an oiled, foam precleaner surrounding the paper element.

Check the air cleaner daily or before starting the engine. Check for a buildup of dirt and debris around the air cleaner system. Keep this area clean. Also check for loose or damaged components. Replace all bent or damaged air cleaner components.

Servicing Precleaner

If so equipped, wash and re-oil the precleaner every 25 hours of operation (more often under extremely dusty or dirty conditions). Replace the precleaner annually, or every 100 hours.

1.Open the door on the blower housing to access the air cleaner element and precleaner.

2.Unhook the latch and remove the air cleaner element assembly for servicing. Make sure the base and the sealing areas are clean before reassembly.

3.Wash the precleaner in warm water with detergent. Rinse the precleaner thoroughly until all traces of detergent are eliminated. Squeeze out excess water (do not wring). Allow the precleaner to air dry.

4.Saturate the precleaner with new engine oil. Squeeze out all excess oil.

Servicing Paper Element

Check the paper element every 50 hours of operation, (more often under extremely dusty or dirty conditions). Clean or replace the element as necessary. Replace the air cleaner element annually, or every 100 hours.

1.Remove the precleaner (if so equipped) from the paper element.

2.Gently tap the paper element to dislodge dirt. Do not wash the paper element or use pressurized air, as this will damage the element. Replace a dirty, bent, or damaged element with a new one. Handle the new element carefully; do not use if the sealing surfaces are bent or damaged.

3.Clean the air cleaner base as required and check condition.

4.Reinstall the precleaner (if equipped) over the paper air cleaner element and install on the base. Secure with the latch.

5.Close and latch the door.

IMPORTANT INFORMATION

Operating the engine with loose or damaged air cleaner components could allow unfiltered air into the engine causing premature wear and failure.

 

 

1

4

3

2

 

 

 

8058-028

1.Air cleaner access door

2.Air cleaner element

3.Latch

4.Precleaner (on some models)

Air filter cleaning and replacement

8058-029

Unlatch and remove element

40-Husqvarna

Image 40
Contents Operator Manual Page Contents English-4 Introduction Good Service Manufacturing NumberSymbols and decals Moving sharp blades under cover Safety Instructions SafetyGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Controls Control LocationsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Fuel Shut Off Valve Cutting Height AdjusterAlways raise the deck to the highest position for transport Hour Meter Seat Adjustment LeverTracking Knob Training SteeringBefore Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Weak Battery Positive + terminal on each battery, taking careRunning Operating On Hills Mowing Tips Stopping the Engine Manual Transport ZT-2800 Bypass LinkagesMaintenance Maintenance ScheduleHusqvarna-35 Battery Replacing batterySafety System Ignition SystemThrottle Cable Engine Cooling Air IntakeChoke Cable Air Filter Briggs & Stratton EngineKohler Engine Servicing PrecleanerServicing Paper Element Kawasaki Engine Fuel Filter Fuel Pump Air FilterTire Pressures Belts Deck Belt InstallationDeck Belt Removal Pump Belt Replacing pump belt Belt installationBelt removal Blade replacement Cutting BladesAdjusting the Mower Deck Leveling deckAnti-scalp rollers Cleaning Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication GeneralLubrication Front Wheel MountFront Wheel Bearings Deck SpindleEngine Oil Changing the Engine Oil Transaxle Transmission Fluid Change Hydraulic Pump Fluid Change Purging Procedures Troubleshooting Troubleshooting Storage ServiceWinter Storage Schematics Technical Data AccessoriesTorque Specifications Standard HardwareEZ4824 / 965880301K Engine TransmissionDimension EZ4824 / 965880301K FrameEZ5224 EZ5226 Engine EZ5224 EZ5226 Frame EZ5221 EZ6124 Engine NGK BPR5ESEZ5221 EZ6124 Frame USA requirements CE requirementsWarranty Limited WarrantyDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 5-8 Hours Change engine oilHour Service Perform the 25-hour service Service Journal Husqvarna-75 At Least Once Each Year Husqvarna-77 Page Page 115 129627 IR 10/29/08
Related manuals
Manual 78 pages 12.6 Kb

EZ5226 / 965921601, EZ4824 / 965880401, EZ4824EC / 965880201, EZ4824K / 965880301, EZ5221 / 965880501 specifications

Husqvarna is a renowned brand in the garden and outdoor power equipment industry, providing innovative solutions for professionals and homeowners alike. The Husqvarna EZ6124 / 966038401, EZC4824 / 966038501, and EZ4824 / 965880401 are standout models within their zero-turn lawn mower range, designed to deliver exceptional performance, user comfort, and durability.

The EZ6124 is equipped with a powerful 24 HP engine that ensures robust performance across various terrains. Its 60-inch cutting deck facilitates efficient mowing, making quick work of large areas while maintaining a pristine cut. This model also features an advanced, easy-to-use height adjustment system, allowing users to set the cutting height with precision, ensuring that grass is maintained at the desired length.

For those seeking a more compact option, the EZC4824 is ideal. This model boasts a 24 HP engine and a 48-inch cutting deck, making it perfect for medium-sized lawns. Its compact design allows for enhanced maneuverability, particularly in tighter spaces. The EZC4824 is also equipped with a comfortable seat and ergonomic controls, ensuring that users can operate it with minimal fatigue during extended mowing sessions.

The EZ4824 is another excellent choice, featuring a similar 24 HP engine paired with a 48-inch cutting deck. This mower stands out for its exceptional agility and speed. Its zero-turn technology enables operators to navigate around obstacles effortlessly, providing a professional-quality finish in less time. With a durable construction, this model is built to withstand the rigors of regular lawn care.

All three models are designed with user-friendly features, including intuitive control systems and easy maintenance options. The cutting decks employ a robust design with reinforced spindles, ensuring longevity and reliability. Additionally, their safety features, including emergency brake systems and rollover protection, enhance operator security.

In conclusion, the Husqvarna EZ6124, EZC4824, and EZ4824 mowers offer a combination of power, efficiency, and comfort. With their innovative technologies and robust design, these zero-turn mowers are perfect choices for homeowners and landscaping professionals looking for high performance and reliability in their lawn care equipment. Whether tackling large open spaces or navigating intricate landscapes, these mowers provide exceptional value and results.