Husqvarna iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817 SKAA, iZ4817KAA, iZ6123KAA manual

Page 15

SETUP AND ADJUSTMENTS

Mower Deck Leveling

Position machine on a flat surface. Preferably level concrete.

Check the tire pressure in all four tires. Inflation should be 15 psi.

Place 2x4’s on edge under the cutting deck from front to rear and lower the deck down onto 2x4’s.

Adjust the four upper chain bolts to the center slots in the deck lift arms. NOTE: Make sure the lift blocks under the frame are tightly bolted to the frame.

Check the chains for equal tension. If unequal adjust upper chain bolt in slot.

Place the deck in the 5” cutting height and measure from the cutting edge of the blade to the flat level surface to check the deck cutting height.

Throttle Lever Tension

Stop engine and remove key.

Throttle lever tension may be adjusted by tightening the pivot bolt. The pivot bolt secures the throttle arm to the mounting bracket which is mounted to the console. Access is gained by removing the console.

Reverse Spring Detent Adjustment Stop engine and remove key.

Pull the motion control lever back to the reverse position and release the lever. When the lever stops it should be in line with the neutral slot, so you can move the lever into neutral slot with out hitting the side of the console frame.

If adjustment is required put the seat in the rear most position on the slide, tilt the seat forward, remove the seat rod from seat frame and fold seat over forward onto the frame.

On the back of the console where the spring is fastened, loosen the 3/8” nut and bolt enough to allow the bolt to slide in the slot. FIG - 4

Rotate the motion control lever out into the neutral slot. While the lever is swung out into the neutral slot pull it against the the back edge of the neutral slot. Holding the lever adjust the spring by sliding the bolt in the slot to remove all the slop and retighten the bolt.

Check your adjustment by repeating the sec- ond step in this process.

If no more adjustment is needed reassemble the seat rod to the seat frame.

Reverse Detent

Adjustment Slot

Motion

Reverse Detent

Spring

Control

 

Lever

 

FIG - 4

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual no REV. IR 09/01/03 Operators manualHusqvarna. All right reserved Beatrice, NE. Printed U.S.A Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportPresentation PresentationCutting Height Setup and AdjustmentsSetup AdjustmentsThrottle Lever Tension Mower Deck LevelingMotion Control Linkage Adjustment Park Brake Adjustment For Models 968999229Controls OperationOperating instructions Starting and operationWhen using this maneuver the machine can Spin very rapidly if one lever is positionedTo far ahead of the other Engine oil MaintenanceSafety interlock system Cutter HousingsDeck belt HardwareAir filter Hydraulic systemCaster Wheels Pump beltLubrication Tire pressureTorque Specifications Maintenance Schedule Problem Trouble ShootingWiring Diagrams Console Harness Schematic Harness Frame Frame Harness

iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817 SKAA, iZ4817KAA, iZ6123KAA, iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, iZ6123KAA specifications

Husqvarna has long been synonymous with quality outdoor equipment, particularly in the realm of zero-turn mowers. Among their extensive lineup, models like the iZ4821KAA, iZ5223KAA, iZ5223KOA, iZ4217SKAA, iZ4817SKAA, iZ4817KAA, and iZ6123KAA stand out for their superior performance and innovative features.

Starting with the iZ4821KAA, this model is equipped with a robust 21 horsepower engine, ensuring reliable power for tackling even the most challenging mowing tasks. Its 48-inch cutting deck allows for efficient navigation around obstacles, while the zero-turn capability enables sharp turns for precise trimming.

Next, the iZ5223KAA boasts a larger 23-horsepower engine and a 52-inch cutting deck, making it suitable for larger properties. The commercial-grade construction provides durability and longevity, while features such as electric blade engagement and a high-back seat enhance user comfort during lengthy mowing sessions.

The iZ5223KOA combines performance and advanced features, including a hydraulic system for improved maneuverability. Its adjustable cutting height provides versatility in maintaining lawns of varying grass lengths.

For those looking for a compact mower, the iZ4217SKAA offers a 17-horsepower engine with a 42-inch deck, perfect for small to medium-sized yards. Its lightweight design and agile handling make it an excellent choice for homeowners seeking efficiency without sacrificing performance.

The iZ4817SKAA and iZ4817KAA both feature a 17-horsepower engine, delivering robust power with a 48-inch cutting deck. These models are designed with user-friendly controls and a comfortable seating position, making them easy to operate for anyone.

Finally, the iZ6123KAA represents the pinnacle of Husqvarna's engineering, featuring a 23-horsepower engine and a 61-inch deck, ideal for commercial use or larger properties. Its innovative technology includes a dual hydrostatic transmission for smooth power delivery and enhanced maneuverability, while built-in safety features ensure a secure mowing experience.

Collectively, these models integrate technologies such as high-capacity air filtration systems, optimized engine cooling, and a user-friendly dashboard with intuitive controls. Each model promises efficiency, comfort, and durability, solidifying Husqvarna's reputation as a leader in power equipment. Whether for residential use or commercial applications, these zero-turn mowers cater to a variety of needs, ensuring a well-maintained lawn with ease and precision.
Top Page Image Contents