Husqvarna H246SL owner manual Upper Chute See Figs a and 5B, Level Mower Deck

Page 7

5 UPPER CHUTE (See Figs. 5A and 5B)

1.Lower mower to its lowest cutting position.

2.Assemble upper chute by inserting curved end into hole in back of cover.

TIP: Holding upper chute as shown and twisting while installing in cover will help keep the rubber seal in place.

NOTE: Handle carefully so as not to damage full bag indi- cator.

UPPER

CHUTE

COVER

FIG. 5A

3.Push in and turn upper chute until it is in line with lower chute.

4.Align the bosses on lower chute with alignment slots on upper chute and slide together.

5.Secure with rubber latch by hooking hole in latch over latch pin.

FULL BAG

COVER INDICATOR

UPPER

CHUTE

HANDLE

LATCH PIN

RUBBER

LATCH

LOWER

CHUTE

ALIGN-

MENT

SLOT

BOSSES

FIG. 5B

6 LEVEL MOWER DECK

Be sure deck is properly leveled for best mower perfor- mance. See your tractors owner's manual for instruc- tions.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model Number H246SL Product No 73 Inch Mower Grass Catcher II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationTable of Contents Know Your Grass Catcher Parts Identification Carton ContentsSupport Assembly See Fig AssemblySee Figs a & 1B Lower Chute See Fig Container Mounting See FigLevel Mower Deck Upper Chute See Figs a and 5BTips for Improved Bagging Operation OperationCustomer Responsibilities MAINTENANCE, Service Oradjust MentsBlade Care KEY Part Description Repair Parts
Top Page Image Contents