Husqvarna Z4822 manual Battery, To clean battery and terminals, Replacing battery

Page 38

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Recharge at 6-10 amperes for 1 hour

To clean battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Open terminal access doors.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift Seat and rotate forward.

2.Open terminal access doors.

3.Using two 1/2" wrenches disconnect BLACK battery cable then RED battery cable.

4.Using 7/16" wrench, remove terminal guard.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall terminal guard.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut.

10.Tighten securely.

11.Close terminal access doors.

12.Lower seat.

Always use protective glasses when handling the battery.

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

CZ-22

1.Terminal guard

2.Terminal access doors Battery installation

English-36

Image 38
Contents Operator´s manual Page Contents OPERATOR’S Manual Rider SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberXxxx xxxxxx Symbols and DecalsSymbols and Decals Objects Engine is Running Moving sharp blades under cover General Operation Safety InstructionsSafety Instructions English-8 Personal Safety Equipment Slope OperationChildren Maintenance General Maintenance Risk of sparking Transport Important InformationCustomer responsibilities Control Locations ControlsControls Motion Control Levers TrackingSeat adjustment knobs FusesBy pass linkages Blade switch RefuelingThrottle Control Ignition SwitchChoke Control Machine must be stopped before activating the parking brake Hour MeterParking Brake Accessories Cutting height pedalTraining OperationOperation Before Starting Starting the EngineDepress the control for disengaging the mower deck Press in and turn the ignition key to the start position To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance = Described in this manual  = Not described in this manual Replacing battery BatteryTo clean battery and terminals Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking and Adjusting Throttle Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Briggs and Stratton engineChecking Tire Pressures Faulty adjustment can cause an accidentReplacing the Fuel Filter Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation EZT belt removal EZT beltTo replace EZT E-Series Zeroturn Transaxle belt Checking the Blades Check the bladesAdjusting the Mower Deck Side-to-side adjustment To level deckFront-to-back adjustment To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing HardwareLubrication Schedule LubricationLubrication Caster wheels Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Checking the oil level Changing the Oil FilterTransmission Problem Cause Trouble Shooting GuideTrouble Shooting Guide Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring Diagrams Wiring diagramZ4822 Z4824 Technical DataTechnical Data Equipment Torque Specifications USA requirements Conformity CertificatesConformity Certificates Delivery Service Service JournalService Journal Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year 112690Rir11/08/05

Z4822 specifications

The Husqvarna Z4822 is a formidable addition to the realm of zero-turn mowers, designed to deliver exceptional performance and efficiency for both residential and commercial users. As part of Husqvarna's reputable lineup, the Z4822 combines innovative technology with user-friendly features to provide an unparalleled mowing experience.

At the heart of the Husqvarna Z4822 lies a powerful engine, typically a commercial-grade Kohler or Kawasaki, providing strong torque and reliability. This ensures that the mower can handle even the toughest mowing tasks with ease, allowing users to maintain their lawns with professional precision. The Z4822's advanced hydrostatic transmission further enhances performance, enabling smooth acceleration and effortless maneuverability around obstacles.

One of the standout features of the Z4822 is its exceptional turning radius. The zero-turn capability allows users to make tight turns and navigate around flower beds, trees, and other landscaping features without missing a beat. This not only saves time but also enhances the overall efficiency of mowing large areas.

The cutting deck on the Z4822 is robust and durable, typically measuring 48 inches, designed to deliver a clean, even cut. Built from high-quality materials, the deck is engineered to withstand the rigors of frequent use while maintaining its performance over time. The cutting height can be easily adjusted, providing versatility for different grass types and mowing conditions.

Moreover, the Z4822 is equipped with ergonomic features that improve the overall user experience. The comfortable seating, combined with user-friendly controls, allows for extended periods of operation without discomfort. The intuitive control panel provides easy access to throttle adjustment, ignition, and other essential functions, ensuring that users can focus on their mowing tasks without any distractions.

Safety is a top priority with the Husqvarna Z4822, which includes features such as a blade brake and operator presence controls. These components work together to ensure that the mower operates safely and effectively, reducing the risk of accidents during operation.

In terms of maintenance, the Husqvarna Z4822 is designed for easy access and servicing. Features like a removable deck and accessible engine components make routine maintenance straightforward, helping owners keep their equipment in peak condition.

In summary, the Husqvarna Z4822 zero-turn mower stands out due to its powerful engine, efficient transmission, exceptional maneuverability, and thoughtful design. Whether for residential use or commercial landscaping, the Z4822 is a solid choice that combines performance, comfort, and safety, making it a favorite among lawn care enthusiasts and professionals alike.