Husqvarna Z4822 manual Maintenance

Page 13

SAFETY INSTRUCTIONS

Maintenance

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

•Never fuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliances.

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

•Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling

English-11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operator´s manual Page OPERATOR’S Manual Rider Series ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceSymbols and Decals Symbols and DecalsXxxx xxxxxx Objects Engine is Running Moving sharp blades under cover Safety Instructions Safety InstructionsGeneral Operation English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsControl Locations Tracking Motion Control LeversFuses Seat adjustment knobsBy pass linkages Refueling Blade switchChoke Control Ignition SwitchThrottle Control Parking Brake Hour MeterMachine must be stopped before activating the parking brake Cutting height pedal AccessoriesOperation OperationTraining Starting the Engine Before StartingDepress the control for disengaging the mower deck Press in and turn the ignition key to the start position To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance MaintenanceMaintenance Schedule = Described in this manual  = Not described in this manual To clean battery and terminals BatteryReplacing battery Always use protective glasses when handling the batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableBriggs and Stratton engine Replacing the Air FilterReplacing the Fuel Filter Faulty adjustment can cause an accidentChecking Tire Pressures Checking the Parking BrakeDeck belt Checking the V-beltsDeck belt installation To replace EZT E-Series Zeroturn Transaxle belt EZT beltEZT belt removal Check the blades Checking the BladesAdjusting the Mower Deck To level deck Side-to-side adjustmentFront-to-back adjustment To adjust anti-scalp rollers Use protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication LubricationLubrication Schedule Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesCaster wheels Engine Oil Briggs & Stratton Changing the Engine OilOil drain valve Changing the Oil Filter Checking the oil levelTransmission Trouble Shooting Guide Trouble Shooting GuideProblem Cause Wrong fuel type English-58 Storage ServiceStorage Winter StorageWiring diagram Wiring DiagramsTechnical Data Technical DataZ4822 Z4824 Equipment Torque Specifications Conformity Certificates Conformity CertificatesUSA requirements Service Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signAfter the First 5-8 Hours Hour Service English-68 English-69 English-70 At Least Once Each Year 112690Rir11/08/05

Z4822 specifications

The Husqvarna Z4822 is a formidable addition to the realm of zero-turn mowers, designed to deliver exceptional performance and efficiency for both residential and commercial users. As part of Husqvarna's reputable lineup, the Z4822 combines innovative technology with user-friendly features to provide an unparalleled mowing experience.

At the heart of the Husqvarna Z4822 lies a powerful engine, typically a commercial-grade Kohler or Kawasaki, providing strong torque and reliability. This ensures that the mower can handle even the toughest mowing tasks with ease, allowing users to maintain their lawns with professional precision. The Z4822's advanced hydrostatic transmission further enhances performance, enabling smooth acceleration and effortless maneuverability around obstacles.

One of the standout features of the Z4822 is its exceptional turning radius. The zero-turn capability allows users to make tight turns and navigate around flower beds, trees, and other landscaping features without missing a beat. This not only saves time but also enhances the overall efficiency of mowing large areas.

The cutting deck on the Z4822 is robust and durable, typically measuring 48 inches, designed to deliver a clean, even cut. Built from high-quality materials, the deck is engineered to withstand the rigors of frequent use while maintaining its performance over time. The cutting height can be easily adjusted, providing versatility for different grass types and mowing conditions.

Moreover, the Z4822 is equipped with ergonomic features that improve the overall user experience. The comfortable seating, combined with user-friendly controls, allows for extended periods of operation without discomfort. The intuitive control panel provides easy access to throttle adjustment, ignition, and other essential functions, ensuring that users can focus on their mowing tasks without any distractions.

Safety is a top priority with the Husqvarna Z4822, which includes features such as a blade brake and operator presence controls. These components work together to ensure that the mower operates safely and effectively, reducing the risk of accidents during operation.

In terms of maintenance, the Husqvarna Z4822 is designed for easy access and servicing. Features like a removable deck and accessible engine components make routine maintenance straightforward, helping owners keep their equipment in peak condition.

In summary, the Husqvarna Z4822 zero-turn mower stands out due to its powerful engine, efficient transmission, exceptional maneuverability, and thoughtful design. Whether for residential use or commercial landscaping, the Z4822 is a solid choice that combines performance, comfort, and safety, making it a favorite among lawn care enthusiasts and professionals alike.
Top Page Image Contents