Husqvarna YTH22V46XLS To Stop Mower Blades, Reverse Operation System ROS, To Operate on Hills

Page 11

OPERATION

TO STOP MOWER BLADES

Disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield

(S) in place (See Fig. 10).

S

Fig. 10

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless

absolutely necessary.

 

02828

ROS "ON"

ENGINE "ON" POSITION

POSITION

(NORMAL OPERATING)

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

Depress brake pedal all the way down.

With engine running, turn ignition key counterclockwise to ROS "ON" position.

Look down and behind before and while backing.

Slowly depress reverse drive pedal to start movement.

When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

To restart movement, slowly release parking brake and brake pedal.

Slowlydepressappropriatedrivepedaltoslowestsetting.

Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 11)

When pushing or towing your tractor, be sure to disengage transmissionbyplacingfreewheelcontrolinfreewheeling po- sition.Freewheelcontrolislocatedatthereardrawbaroftractor.

Raise attachment lift to highest position with attachment lift control.

Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

Fig. 11

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

SERVICE REMINDER/HOUR METER

Service reminder shows the total number of hours the engine has run and flashes to indicate that the engine or mower needs servicing. When service is required, the service reminder will flash for two hours. To service engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the ignition key is in any position but "STOP". For accurate reading, be sure key remains in the "STOP" position when engine is not running.

11

Image 11
Contents YTH22V46XLS II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Toremovetractorfromcarton AssemblyTools Required for Assembly Unassembled PartsCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation DP Z H Know Your TractorStopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking BRAKESee FigTo USE Cruise Control J See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig To Move Forward and Backward See FigTo Operate on Hills Service REMINDER/HOUR MeterTo Stop Mower Blades Reverse Operation System ROSTo Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsSchedule MaintenanceMaintenance General RecommendationsBlade Removal See Fig BatteryTractor Blade CareEngine IN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Raise attachment lift lever to highest position To Level Mower Visual SIDE-TO-SIDE Adjustment See FigPrecision SIDE-TO-SIDE Adjustment See Fig To Replace Motion Drive Belt See Fig To Replace Mower Blade Drive Belt See FigTo Remove Wheel for Repairs See Fig To Start Engine with a Weak Battery See FigTo Check Brake Front Wheel TOE-IN/CAMBERTransmission Engine OIL StorageOther Fuel SystemProblem Cause Correction Engine continues To run when operBattery will not Fires when turnRelay SchematicElectrical KEY Part Description Chassis Chassis Drive Nut U-CHNL 1/4-20 550DP .350 PNL Engine 30!2+ª!22%34%2ª+4Engine Power Rating Information Steering Assembly 532 43 Wheel, Steering 532 19 532 42 Seat Seat Assembly100 101 Mower LiftMower Deck KEY Part NO. no Description Wheels and Tires DecalsOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation02.09.11 BAD

YTH22V46XLS specifications

The Husqvarna YTH22V46XLS is a versatile and powerful lawn tractor designed to make mowing your lawn an efficient and enjoyable task. With its robust features and advanced technologies, this tractor stands out in the crowded market of garden equipment.

At the heart of the YTH22V46XLS is a 22 HP Kohler engine, which provides reliable power and performance. This engine, known for its durability and fuel efficiency, allows users to tackle even the toughest mowing challenges with ease. The automatic transmission makes operation smooth, enabling seamless transitions between speeds without the need for manual shifting.

One of the prominent features of the YTH22V46XLS is its 46-inch cutting deck, designed for precision and efficiency. This deck provides a wide cutting path, enabling users to cover more ground in less time, while the seven cutting height positions allow for customization based on specific lawn requirements. The deck is also equipped with a washout port, making maintenance simpler and helping to keep the underside clean from grass clippings.

Maneuverability is another key characteristic of the YTH22V46XLS. With an ergonomic design and a tight turning radius, this lawn tractor can easily navigate around flower beds, trees, and other obstacles in your yard. The front-mounted headlights enhance visibility during early morning or late evening mowing sessions, making this tractor a practical choice for any lawn care enthusiast.

Husqvarna has also integrated several innovative technologies into the YTH22V46XLS to improve user comfort and functionality. The step-through chassis design ensures easy access to the seat, reducing strain on the back during entry and exit. Additionally, the comfortable seat, complete with armrests, provides support during long mowing sessions.

For users who prefer a more tailored mowing experience, the YTH22V46XLS features the ability to attach various accessories such as a bagger or mulching kit. This flexibility allows owners to optimize their mower for specific tasks, whether they want to collect clippings or finely chop grass to return nutrients to the soil.

In summary, the Husqvarna YTH22V46XLS embodies a perfect blend of power, efficiency, and comfort, making it an ideal choice for homeowners looking to maintain their lawns with ease. Its advanced features and technologies deliver an exceptional mowing experience that meets the demands of both small and large lawns alike.