Husqvarna YTH22V46XLS owner manual To Level Mower, Visual SIDE-TO-SIDE Adjustment See Fig

Page 20

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 26)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

Fig. 26

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 27)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

Fig. 27

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 28 & 29) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

BB

Fig. 28

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

TIGHTEN ADJUST

LOOSEN

ADJUST NUT

NUT B TO RAISE

B TO LOWER

MOWER

 

02950

MOWER

 

LOOSEN JAM NUT A FIRST

 

Fig. 29

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents YTH22V46XLS Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Assembly Tools Required for AssemblyUnassembled Parts ToremovetractorfromcartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor DP Z HHOW to USE Your Tractor Attachment Clutch Switch Disengaged EngagedTo SET Parking BRAKESee Fig Stopping See FigTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigTo Move Forward and Backward See Fig To USE Cruise Control J See FigService REMINDER/HOUR Meter To Stop Mower BladesReverse Operation System ROS To Operate on HillsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Purge TransmissionMaintenance MaintenanceGeneral Recommendations ScheduleBattery TractorBlade Care Blade Removal See FigEngine Cleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Raise attachment lift lever to highest position To Level Mower Visual SIDE-TO-SIDE Adjustment See FigPrecision SIDE-TO-SIDE Adjustment See Fig To Replace Mower Blade Drive Belt See Fig To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig To Check BrakeFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Storage OtherFuel System Engine OILProblem Cause Correction To run when oper Battery will notFires when turn Engine continuesSchematic RelayElectrical KEY Part Description Chassis Chassis Drive Nut U-CHNL 1/4-20 550DP .350 PNL 30!2+ª!22%34%2ª+4 EngineEngine Power Rating Information Steering Assembly 532 43 Wheel, Steering 532 19 Seat Assembly 532 42 SeatMower Lift 100 101Mower Deck KEY Part NO. no Description Decals Wheels and TiresSuggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX02.09.11 BAD

YTH22V46XLS specifications

The Husqvarna YTH22V46XLS is a versatile and powerful lawn tractor designed to make mowing your lawn an efficient and enjoyable task. With its robust features and advanced technologies, this tractor stands out in the crowded market of garden equipment.

At the heart of the YTH22V46XLS is a 22 HP Kohler engine, which provides reliable power and performance. This engine, known for its durability and fuel efficiency, allows users to tackle even the toughest mowing challenges with ease. The automatic transmission makes operation smooth, enabling seamless transitions between speeds without the need for manual shifting.

One of the prominent features of the YTH22V46XLS is its 46-inch cutting deck, designed for precision and efficiency. This deck provides a wide cutting path, enabling users to cover more ground in less time, while the seven cutting height positions allow for customization based on specific lawn requirements. The deck is also equipped with a washout port, making maintenance simpler and helping to keep the underside clean from grass clippings.

Maneuverability is another key characteristic of the YTH22V46XLS. With an ergonomic design and a tight turning radius, this lawn tractor can easily navigate around flower beds, trees, and other obstacles in your yard. The front-mounted headlights enhance visibility during early morning or late evening mowing sessions, making this tractor a practical choice for any lawn care enthusiast.

Husqvarna has also integrated several innovative technologies into the YTH22V46XLS to improve user comfort and functionality. The step-through chassis design ensures easy access to the seat, reducing strain on the back during entry and exit. Additionally, the comfortable seat, complete with armrests, provides support during long mowing sessions.

For users who prefer a more tailored mowing experience, the YTH22V46XLS features the ability to attach various accessories such as a bagger or mulching kit. This flexibility allows owners to optimize their mower for specific tasks, whether they want to collect clippings or finely chop grass to return nutrients to the soil.

In summary, the Husqvarna YTH22V46XLS embodies a perfect blend of power, efficiency, and comfort, making it an ideal choice for homeowners looking to maintain their lawns with ease. Its advanced features and technologies deliver an exceptional mowing experience that meets the demands of both small and large lawns alike.
Top Page Image Contents