On-Screen Manual > Scanning Guide > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning
in Basic Mode
Scanning in Basic Mode
In Basic Mode, you can scan easily by following the on-screen steps.
1. Place the document on the Platen, then start ScanGear (scanner driver).
Starting ScanGear (Scanner Driver)
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2. Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, scan in Advanced Mode with Color Mode
set to Color or Color(48bit), and Descreen set to ON.
Scanning in Advanced Mode
3. Click Preview.
Preview image appears in the Preview area.
Sayfa 155 / 268 sayfaScanning in Basic Mode