On-Screen Manual > Scanning Guide > Troubleshooting > Installation Problems > The Found New Hardware Wizard or
A
dd Hardware Wizard screen appears when the scanner is connected to a compute
r
The Found New Hardware Wizard or Add Hardware Wizard
screen appears when the scanner is connected to a computer
Check: The machine may have been connected before installing the
software programs from the Setup CD-ROM.
Disconnect the USB cable from the computer, then click Cancel in the Found New Hardware Wizard or
A
dd Hardware Wizard screen to close it. Then install the software programs from the Setup CD-ROM .
Page top
Sayfa 230 / 268 sayfaThe Found New Hardware Wizard or Add Hardware Wizard screen appears ...