ONormally, when you press the shutter button halfway and focus cannot be achieved, the lens is driven to search the correct focus. This lens driving operation can be turned off.
OWhen focus has been achieved once and refocusing fails, the subsequent lens driving operation can result in grossly out of focus. This subsequent lens driving operation is turned off.
OThis disables the external Speedlite’s
OAt a joint photo session, etc., this prevents the
OThis takes the picture automatically when the subject comes to the preset focusing distance. Focusing detection is performed using the selected AF point.
OSet the lens focus mode switch to <MF> and focus manually at the desired point of focus.
OKeep pressing the shutter button fully.
OUsing an accessory such as Remote Controller
OWhen this function is used in combination with a flash, the flash remains on standby at full charge. Consequently, the flash batteries are used up more quickly. (The Speedlite’s SE mode is disabled.)
OWhen you use a flash with this function, set the drive mode to single shooting. If you select continuous shooting, the flash will be unable to charge in time for successive shots and will not fire at full charge.
OIf you set the drive mode to continuous shooting, set the number of shots in
O
ODo not use this function when
OWhen you select beyond the peripheral AF point, the selection stops there. It makes selecting a peripheral AF point faster.
OIf automatic AF point selection has been preset at [AF frame registration] setting, the preset setting remains valid. For more details, refer to “Registering and Switching the AF Point” in the camera’s Instruction Manual supplied with the camera.
OEnables the standard horizonal AF point selection together with automatic AF point selection with
OConvenient when you want to use automatic AF point selection while
OIn the list box, select the speed of continuous shots during continuous shooting.
OBy reducing the maximum continuous shooting speed, AI Servo AF continuous shooting can be more stable.
OWith the
OThis enables you to enter the maximum number of shots to be exposed during continuous shooting while the shutter button is pressed fully.
OConvenient when you do not want to shoot an unwanted scene that follows.
Cover/Table of
Contents
Introduction
Downloading1Images from the Camera
Setting2the Cameras other than the
Setting3the
Remote4Shooting
Troubleshooting
Index