OSelect the maximum and minimum shutter speeds from the list box.
For example, if you set 1/2000 sec. as the fastest shutter speed and 1/60 sec. as the slowest, the shutter speed range will be 1/2000 to 1/60 sec.
OThis makes shutter speed selection faster and prevents a
O If you set the maximum and/or minimum shutter speed to one that is not a
OTo ensure that a proper flash sync speed is set in the Program AE mode, a shutter speed range of 1/200 sec. to 1/80 sec. cannot be set with the
OIf safety shift has been enabled (with
OSelect the maximum and minimum apertures from the list box.
For example, if you set 1.4 for the largest aperture (minimum f/number) and 8.0 for the smallest aperture (maximum f/number), the usable aperture range will be f/1.4 to f/8.0.
OYou can better control the apertures used by setting the range of usable apertures.
O Specify a minimum aperture value that is smaller than the maximum aperture setting. If you select a minimum aperture value that is larger than the maximum aperture, a warning message appears and the setting reverts to the default value.
OIf you set the maximum and/or minimum aperture to one that is not a
OIf the largest aperture of the attached lens is smaller than the largest aperture you set with
OIf safety shift has been enabled (with
OOnly while you press the <> button, you can switch to the preset shooting mode, exposure setting (such as the aperture for
exposure compensation amount.
OSelect settings that are appropriate for each shooting mode.
OThe modes and settings are preset with the camera.
OConvenient when you want to instantly select the preset modes and settings to suit a particular shooting situation such as backlit or
1Set the shooting mode and shooting mode settings (for example, aperture setting for
2 Register the modes and settings.
O First press the < > button, then press the <> button.
¿< >appears in the LCD panel,
indicating that the modes and settings have registered.
O The registered modes and settings can be modified any number of times.
O To register the modes and settings, first press the < > button before the <> button. If you press the <> button first, the camera will only select the registered modes and settings instead.
OBulb cannot be preset.
OYou cannot select the registered modes and settings during continuous shooting.
O If
OIf
OIf the shooting and metering modes you want to set are excluded by the restrictions in
OEven if the shooting and metering modes selected by
O If
OWhen
Cover/Table of
Contents
Introduction
Downloading1Images from the Camera
Setting2the Cameras other than the
Setting3the
Remote4Shooting
Troubleshooting
Index