Downloading Selected Images
You can display the images saved on a memory card in the camera, select the images you want and download them to your computer. You can follow this same procedure when downloading images using a
1Click the [Lets you select and download images] button.
¿The image download window appears and the images on the memory card are displayed.
You can select the folder of the image displayed in the window.
You can select images by condition.
Downloads the images to computer.
You can select the size of the displayed image.
You can show/hide the image frame.
You can show/hide the image information display area.
Starts the ZoomBrowser EX.
Deletes the image.
The display switches to the camera settings window
Displays the histogram (brightness distribution). [Bright.] is the brightness display, and [RGB] is the RGB display.
Cover/Table of
Contents
Introduction
Downloading1Images from the Camera
The above window shows information displayable when EOS 30D is connected. The displayed information varies depending on the camera model connected.
2Select the images to download. O Click the target image.
O To select multiple images, hold down the <Ctrl> key and click the images.
O To select sequential images, click the first image and then hold down the <Shift> key and click the last image.
Displays basic shooting information.
Image information display area
Displays detailed shooting information.
Displayed on RAW+JPEG images. | Displayed on images that are protected. |
Displayed on RAW images.
3Click the [Download Images] button.
¿ The [Download image] dialog box appears.
4Specify the save destination and then click the [OK] button.
¿ The [Save File] dialog box appears and the images are saved in the specified folder.
OWhen all the images have been downloaded, the ZoomBrowser EX starts up and the downloaded images are displayed. For further instructions, refer to the ZoomBrowser EX Instruction Manual.
OWhen switching to the main window, select the [Window] menu X [Main Window].
OTo exit EOS Utility, click the [File] menu X [Exit].
OWhen disconnecting the interface cable from the camera and computer, be sure to exit EOS Utility and then set the camera’s power switch to <OFF> before disconnecting the cable.
O [ ] is displayed on images previously downloaded to your computer.
O[ ] is displayed on images shot with AEB.
OWith the
OYou can change the software that starts up when you download images, from ZoomBrowser EX to Digital Photo Professional
Setting2the Cameras other than the
Setting3the
Remote4Shooting
Troubleshooting
Index