SSelecting the AF Point N
In Basic Zone modes, the camera will normally focus the closest subject automatically. Therefore, it might not always focus your target subject. In the <d>, <s>, <f>, and <a> modes, you can select the AF point and use it to focus the target subject.
2
Press the <S> button. (9)
XThe
Select the desired AF point.
Press the <S> key to select the AF point.
While looking at the viewfinder, you can select the AF point by turning the <6> dial until the desired AF point lights in red.
When all the AF points light up, automatic AF point selection will be set. The AF point will be selected automatically to focus the subject. Pressing <0> toggles the AF point selection between the center AF point and automatic AF point selection.
3 Focus the subject.
Aim the selected AF point over the subject and press the shutter button halfway to focus.
83