Canon 1100D, 5157B002, 5161B039 manual 72

d: Program AE

The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE.

1 2

Set the Mode Dial to <d>.

Focus the subject.

Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway.

XThe dot inside the AF point achieving focus lights briefly in red, and the focus confirmation light <o> in the viewfinder’s bottom right lights (with One Shot AF).

XThe shutter speed and aperture will be set automatically and displayed in the viewfinder.

3 heck the display.

A standard exposure will be obtained as long as the shutter speed and aperture display do not blink.

4 Take the picture.

Compose the shot and press the shutter button completely.

If you use a TS-E lens to shift the lens vertically or use an Extension Tube, the standard exposure might not be obtained or an irregular exposure may result.

72