Specifications
Power Requirements: 120 VAC, 60Hz, 2.5A
100 VAC, 50/60Hz, 2.5A
200/230/240 VAC, 50Hz, 1.4A
Power Consumption: 320 VA
Dimensions(H x W x D): 49.6" x40.2" x 31.9" (126cm x 102cm x 81cm)
Weight: 595 lb. (270kg)
Punch Tools:
• Loose-leaf/Office Hole Punch Tool
–2-hole
–3-hole (Diameter 0.313")
–4-hole (Diameter 0.276")
• PlasticComb Punch Tool (Rectangular)■
–Rectangular Holes(0.315" x 0.126")
• Wire Comb Punch Tool2-1 Pitch (Round)■
–Round Holes(Diameter 0.236")
• Wire Comb Punch Tool3-1 Pitch (Round)■
–Round Holes(Diameter 0.157")
• Wire Comb Punch Tool2-1 Pitch (Rectangular)■
–Rectangular Holes(0.256" x 0.217")
• Wire Comb Punch Tool3-1 Pitch (Square)■
–Square Holes(0.157" x 0.157")
Punch ToolDurability: 12 - 15 Million Actuations
NOTE:You mayorder customized Punch Toolsto meet your specifications. Please contact your Canon-
authorized Dealerfor more information.
▲The Puncher isinterchangeable between the imageRUNNER 110 and the imageRUNNER Pro 150+.
■Please checkwith your localCanon-authorized Dealer for availability.
1-800-OK-CANONwww.usa.canon.comCanon U.S.A., Inc.One Canon PlazaLake Success, NY11042Super Savings
The superior speed of the in-line Puncher significantly
reducesjob turnaround time for hole-punched jobs. Factor
in the cost of ordering and stocking pre-punched media,
the labor required for off-line punching, and the potential
for error and document damage associated with manual
job collation, and the benefit to your operation is even
greater.
Easy To Use
As a fully integrated accessory, the in-line Puncher offers
unparalleled convenience. All punching features are
directly selectable from the machine’soperator-controlled
interface; no separate programming is required. Puncher
tools for different hole patternsare operator-interchange-
able, and a variety of paper types is supported. There is
also full page-level jam recovery on the device to guaran-
tee the set and sheet integrity ofyour jobs.
A Valuable Investment
Adding the in-line Puncher to your Networked Production
System will give you unmatched flexibility in produc-
ing ready-to-bind output with minimal time, cost, and
operator-involvement.
NOTE: Cannotconfigure
the imageRUNNER
device with both the
Booklet-maker and the
in-line PerfectBinder.
*OptionalAccessories
**Optionalfor the imageRUNNER 110; Standard for the imageRUNNER Pro 150+
PCrunning ImageSmart
DocumentMastering*
imageRUNNER
System Controller
imageRUNNER
Marking Engine
Inserter*
FinisherPuncher*
Booklet-maker*
PerfectBinder*
Stacker(s)* with
Removable Dolly
Paper Supply
Module**
imageSCANNER 65*
0033W257
0802-PU-7.5M
PRINTED ON RECYCLED
PAPER IN THEU.S.A.
Canon isa registered trademark, and IMAGERUNNER, Canon Know How, and the
GENUINElogo are trademarks of Canon Inc. IMAGEANYWARE is a service mark of
Canon U.S.A., Inc. All other terms and product names may be trademarksor
registered trademarksof their respective owners, and are hereby acknowledged.
Specificationssubject to change without notice.